1.5m x 83mm Heavy Duty Rubber Floor Cable Cover Protector Twin Channel Conduit

1.5m Twin Channel Rubber Heavy Duty, Floor Cable Protector

Technical Specification:

Outer size:Length: 1.5mWidth: 83mm

2x Internal Cable Channel Size:

This cable cover has two internal channels, allowing you to keep your cables separate throughout the length of the unit. This will prevent interference if you plan to run any data cables alongside power cables for example.

Width: 13mmHeight: 12mmEach individual channel can hold 1-2 cables with a maximum diameter of 7.5mm per cable or 1 larger cable in each channel.

Standards – BS EN 60670-1:2005 PART 1Overview:

This cover blends into any home (garage), public or commercial environment due to its narrow and discreet appearance. The protectors are designed for indoor use with a simple installation process.

Each piece has a non-slip, textured back / underside, so when it is walked over it won’t move (on carpet). If you want to attach to the floor securely, the ribbed backing creates a larger surface area for your chosen adhesive (sealant/glue), this ensures a stronger bond to the chosen surface.

Cables can be easily removed & installed by simply slicing through the bottom of the unit with a Stanley Knife creating a split (see picture above).

This floor protector can be cut down to your required size with a pair of sharp scissors or a Stanley Knife.

There are two pre-cut holes that run through the length of the unit. This allows you to connect two lengths together using connector rods (we can supply these). This allows you to neatly extend the cable protector if required.