48pc Metric and Imperial UNF UNC Rethread Tap and Die Kit M6 - M14 1/4in - 5/8in

Professional rethreading kit for commercial or occasional use

48pc re thread kit

Metric, UNF and UNC rethread kit

Metric and imperial Rethread taps and dies

Suitable for repairing damaged or stripped internal and external threads

Taps and dies are suitable for chasing out damaged threads and the removal of nicks and burrs without undercutting good threads

Thread file restores damaged external threads on any diameter either right or left handed

SET INCLUDES THE FOLLOWING

RE-THREAD TAP SIZES

• UNF / UNC - 1/4in. 5/16in. 3/8in. 7/16in. 1/2in. 9/16in. 5/8in.
• METRIC – M6 x 1.00, M8 x 1.25, M10 x 1.0, M10 x 1.25, M10 x 1.50, M11 x 1.5, M12 x 1.25, M12 x 1.5, M12 x 1.75, M14 x 1.5
• UNF / UNC - 1/4in. 5/16in. 3/8in. 7/16in. 1/2in. 9/16in.
• METRIC – M6 x 1.00, M8 x 1.25, M10 x 1.0, M10 x 1.25, M10 x 1.50, M11 x 1.5, M12 x 1.25, M12 x 1.5, M12 x 1.75, M14 x 1.5
• 9, 10, 12, 16, 20, 27, 28 and 32 TPI
• 11, 12, 13, 14, 16, 18, 20 and 24 TPI

RE-THREAD DIE SIZES

THREAD FILE SIZES

Comes in a blow molded case for easy storage and transportation