See more Extractor fans
Newlec NL880H Axial Extractor Fan 4 Inch /100mm (Humdistat & Pullcord Model)
Sold & shipped by Prime Electrical Group Ltd
Available online only and not stocked in B&Q stores
£
42.85
Checking availability...
Product details
Product information
This model incorporates an automatic condensation (humidity) sensor which switches the fan on when the condensation level builds up. Once the condensation clears the fan automatically switches off. Additionally there is a pull-cord that can be used to over-ride the humidity sensor and switch the fan on. Normally used in toilets or bathrooms (outwith zone 2). This fan requires a permanent live + neutral (2 wires, excluding earth) connected to operate correctly.
Features and benefits
- Mains voltage 240V AC 50Hz. Requires TWO separate electrical connections, permanent live and neutral. Class II - double insulated, no earth connection required
- Extract performance: 24 litre per second
- 16 watt power consumption
- IPX4
- BEAB approved
- UKCA & CE certified
- Dimensions: 155mm high x 155mm wide x 37mm deep (beyond installed surface). 99mm diameter spigot extends for 53mm. For connection to 100mm / 4 inch round ducting
Specifications
Colour | White |
---|---|
Product height | 155mm |
Product width | 155mm |
Projection from the wall | 37mm |
Spigot diameter | 99mm |
Extraction rate | 24m³/h |
Noise level at 3m | 32dB(A) |
Room use | Bathroom & kitchen |
IP rating | IPX4 |
Model name/number | NL880H |
Control type | Humidistat |
Product code | 5018307193252 |