Orac Decor C422 Premium Coving Moulding 2 Pack

A traditional tiered dentil effect is created by this grand C422 cornice design. As a single moulding it covers approximately 8 inches by 7 inches. Choosing the P.6020 panel mould as dado rail will add a co-ordinated look to your room. The C422 dentil coving or dentil cornice is a large bold design from the Orac Luxxus coving range. This dentil coving has a profile of 17 x 19.5cm with a diagonal of 25.9cm. The C422 large dentil coving is a tiered coving with line detail in the top section and the dentil design in the lower half. This coving is a large dentil coving design which suits rooms where Victorian coving and Edwardian coving would be expected. C422 dentil coving is designed for larger room sizes with higher ceilings. In situations where Victorian and Edwardian houses have been adapted updated or converted Orac coving is an excellent replacement of plaster coving. Room suggestions are; entrance hall coving hallway coving dining room coving lounge coving or as coving for flats and coving for apartments. For a smaller dentil coving consider the C211 dentil coving or smaller still the CX129 dentil coving. For other mouldings to suit this decorative dentil coving consider the P6020 dentil dado rail and the R40 ceiling rose. The Orac dentil coving range is made from easy to use materials to recreate the styles of Victorian coving and Edwardian coving without the hassle of plaster coving. Length: 200cm Height: 17cm Width: 19.9cm