Orac Decor C901F Flexible Premium Coving Moulding

C901 is a flexible uplighter trough type cornice moulding which can be used to create background or mood lighting. This coving design is particularly popular with the restaurant & hotel trade. This coving should be at least 14 cm below the ceiling if lighting components are utilised. Choose the socket & lamp sets separately if mood lighting is required. If you are using this cornice as an uplighter a separate transformer is needed for every 2 metre section. These are readily available at electrical factors and should be installed by an approved NICEIC electrical contractor. Orac Luxxus C901 coving has been a popular choice since 1999. The trough shaped profile features a panel mould style feature near it's base has been designed to reflect light off ceilings and create atmosphere to any room. The C.901 can be attractive if used without light fittings although in these cases it is usually placed flush to the ceiling. Almost our entire range is suitable for installation by a competent DIY enthusiast or general builder but the C901 should always be mechanically fixed if being used in an uplighter capacity and any electrical work must be by a registered and approved electrical contractor. The coving profile is 15 x 12.5cm and has a diagonal of 19.5cm. The C901 coving has a convex curve with line detailing at the top and a foot at the base with further line detailing. This is a multi tasking coving which can be used against the ceiling or when placed lower down the wall as coving lighting. Otherwise known as indirect lighting or up lighting. A smaller version is the C902 indirect lighting coving and a larger version is the C900 indirect lighting coving (C900 coving is only available in rigid). Length: 200cm Height: 15.2cm Width: 12.4cm