Orac Decor SX138 Skirting Moulding 6 Pack

Skirting boards are sometimes referred to as architrave skirting board should not be confused with PVC skirting board DIY plastic skirting board or DIY uPVC skirting. Made from duropolymer this is a quality Orac product from skirting board Surrey. It is suitable for the professional or home installer. To install their own DIY skirting board general skills are all that are needed. As DIY skirting cutting is similar to wood using a saw preferably a thicker blade for direction stability and with small sharp teeth. If required any slight unevenness in surfaces can be filled using our filler. Adhesion is rapid but there is ample time to make adjustments. With the primed surface finishing and painting is made easier. SX138 ogee skirting board is an easy installation waterproof skirting board. Made from Duropolymer the SX138 skirting board is a plastic skirting board which is impervious to water and requires only the top coat of paint to complete. The SX138 is a 14cm high plastic skirting board with an ogee skirting board design. The SX138 plastic skirting board can be used as a diy skirting board throughout the home. Use as bathroom skirting board shower room skirting board utility room skirting board kitchen skirting board lounge skirting board dining room skirting board hall way skirting board and bedroom skirting board. Additionally this ogee skirting board can be used as a cable tidy tucking electrical cables in its void more conveniently than lifting the floor or in the walls. Skirting board lights can also be fitted ideal for entrance lighting hallway lighting and stair lighting. This is a plastic waterproof diy skirting board far more practical than MDF skirting board or wood skirting board. This is another excellent easy to install DIY skirting board from Orac. Length: 200cm Width: 13.8cm Length: 1.5cm