QTY 2x Black 50mm Steel Hook Lighting C / G Clamp Truss Bar Stage Bracket Lights

QTY OF 2 Matt Black 50mm Hook Clamp for Stage Lighting Colour - BlackOverview;Heavy Duty Steel ConstructionTool-Free InstallationCompatible with most standard lighting bracketsCan be used with lighting truss that has a 50mm diameterMax Load 25KgRoHS ComplianceUsage - These 50mm Hook clamps have a multitude of uses in stage or theatre situations. Ideal for securing lights, stage weights or set drapery, they’re constructed from heavy-duty steel, and able to support a load of up to 25kg, ample for the majority of stage lights or effects. The threaded M10 fixings require no tools to fit and remove, so setup takes a matter of moments.In order to reduce reflection, the clamp is powder coated in an unreflective matt black finish, preventing glare from distracting your actors.Setup - Using the clamps to secure your stage equipment is as simple as can be. Loosen the wing-nut on the base of the clamp until it comes free, then slot the threaded peg through the mounting bracket on the top of your light. Replace the wing-nut and tighten by hand until secure.

Next, loosen the fastening screw on the rear of the clamp and hook the upper section over your rail or lighting stand, once you’ve obtained the positioning you want, tighten the screw so it locks the clamp in position, making sure your light stays pointing exactly where you want it, as well as safely securing it to the rail. Dimensions & Weight50x125mmWeight – 360g