See more Extractor fans
Elta FLUX HR 100 (4") Single Room Heat Recovery
Sold & shipped by MOULD STOP LTD
Available online only and not stocked in B&Q stores
Product details
Product information
Alternate flow with flow reversal approx. every 70 seconds.
The FLUX HR 100 is ideal for small bedrooms, dining rooms and living rooms with a cubic volume of no more than 40m³. If you want to ventilate larger rooms we recommend using our FLUX HR-150 which will ventilate up to 70m³.
Attention:
The unit should operate continuously, and only stopped for maintenance or service. When heat exchange is not useful (for example in midseason - when indoor and outdoor temperatures are similar), or when heat exchange is not recommended (for example with the option “summer free cooling”), or it is requested to increase the acoustic comfort, or in case of extreme weather conditions (for example with strong wind or exceptionally rigid temperatures), it is recommended to set the unit in extract only mode (eventually at minimum speed) and NOT to switch it off.
Please see our other listing for the optional control switch!
- Ducting included
- Fittings & fixings included
- Guarantee - 5 years
Features and benefits
- Single Room Heat Recovery *4 inch model*
- Ideal for bedsits, HOA's etc
- Retain the majority of your heat whilst ventilating the room.
- Helps tackle the causes of condensation and mould
- Very low running costs and saves money on heating
- Extremely quiet
- The removable front cover makes filter cleaning easy
- IPX4 rated
Specifications
Brand | Mould Stop |
---|---|
Model name/number | Elta FLUX HR 100 |
Pack quantity | 1 |
Fitting type | Recessed |
Product length | 570mm |
Product width | 164mm |
Product height | 218mm |
Spigot diameter | 110mm |
IP rating | IPX4 |
Extraction rate | 90m³/h |
Power consumption in use | 2.6kWh |
Power voltage supply | 220-240V |
Noise level at 3m | 29dB(A) |
Product code | 5060690453444 |