See more Extractor fans

Home

Right chevron

Air treatment

Right chevron

Extractor fans

Right chevron
Left chevron
icons.title_zoominicons.title_zoomouticons.title_zoomreset
Vortice 12013 ARIETT IT Built-In Centrifugal Extractor Fan with 100 mm / 4 Inch (Timer Model)
Right chevron

Vortice 12013 ARIETT IT Built-In Centrifugal Extractor Fan with 100 mm / 4 Inch (Timer Model)

Sold & shipped by Prime Electrical Group Ltd

Available online only and not stocked in B&Q stores

£
92.90
Loading
Checking availability...

Product details

Product information

    Stylish 4” (100mm) centrifugal extractor fan. An quiet and efficient fan, providing excellent low energy and low noise performance. Ideal for modern bathrooms and toilets. Easy to install and suitable for wall mounting. These have been specifically designed for ceilings where the void area is restricted, for example, downstairs or between the floors in flats. All fans have the optional side or rear exit low profile connector, or high profile connector .This model is for operation with the room light switch. When the light is switched on the fan comes on, when the light is switched off the fan continues to run for a pre-set time. Requires permanent live, switched live and neutral (3 wires excluding earth) at the fan position in order to operate correctly. Please note that the timer function cannot be used unless you have these three wires to connect.

    • Only fittings included
    • Ducting not included

    Features and benefits

    • Mains voltage 220-240V AC 50Hz. Requires THREE separate electrical connections, permanent live, switched live and neutral. Class II - double insulated, no earth connection required
    • Extraction rate 19.4 litres per second, 80 cubic metres per hour
    • Sound output 43dB(A) @ 3m. Two speeds selectable at installation
    • Power consumption 19 watts. IPX4 splash proof protection
    • Suitable for wall and ceiling installation. For an intermittent extract of shower rooms, en-suites, w.c’s.
    • Suitable for ducting up to roof tile vents. Contains integral backdraught shutter
    • Timer adjustable from 3 to 20 minutes. Metallic washable filter. Made in Italy. UKCA & CE certified
    • Dimensions: 252mm wide x 250mm high x 135mm deep (beyond installed surface). 97mm diameter spigot extends for 25mm (see picture 2 for diagram)

    Specifications

    BrandVortice
    MaterialABS plastic
    ColourWhite
    Product height250mm
    Product width252mm
    Projection from the wall23mm
    Spigot diameter97mm
    Extraction rate80m³/h
    Power voltage supply220-240V
    Noise level at 3m43dB(A)
    Power consumption in use19kWh
    Room useBathroom & WC
    IP ratingIPX4
    Model name/number20
    Control typeTimer
    Overload protectionOverload protection
    Timer typeAdjustable
    Product code8010300120133