Rated 5 out of
Good safety feature.
Strong metal structure with safety feature. Recommended.
Date published: 2017-03-14
Rated 4 out of
Good product - Just a little short on info
These things come in two sizes - 10mm or 12.7mm (½")and nothing on the packaging or DIY.com says that these measurements refer to the diameter at the base of the fitting. But once you have that sorted, it's pretty well plain sailing afterwards.
As my lamp was metal, I would have preferred a facility for an earth the but this wasn't difficult to overcome.
All-in-all, not the most robust piece of kit I've ever purchased but good value and seems to be doing the job so far.
Date published: 2016-08-04
Rated 2 out of
Bought this today. Although it is British made two of the 3 terminal screws were so loose in their chambers that they would not tighten onto the cable. I had to solder them in.
Date published: 2017-07-12
Rated 1 out of
Very poor design
I originally purchased three of the lamp holders to replace American cable and socket on lamps bought in the U.S., two of the three sockets were returned to the store because the earth connection within the socket was unusable due to the small anchor screw turning on itself and not holding the earth in place. I have since purchased a further socket which is little better but by increasing the wire in the socket (doubling the wire on itself) have managed to secure the earth. I am not happy with the socket and continue to look for a replacement which is difficult because the connection of the socket is via a 10mm screw thread inner tube
Date published: 2017-06-07