Dulux Trade White Undercoat 5L
£7.68 per L
Dulux Trade White Undercoat 5L
[This is a block of tabs..]
Apply this undercoat from Dulux Trade to interior metal & wood, using a brush or roller, to prepare the surface for painting. It takes 16 hours to dry and will cover 17 m² per litre on average.
- Guarantee - 1 year
|Coverage||17 m² per litre|
|Application||Brush or roller|
|For use on||Metal & wood|
Health and Safety
Please note that this item has additional safety or regulatory datasheets available. The product may have possible health and safety hazards covered in these documents. Refer to the container for full information and always follow the instructions.
Help & Advice
Wall Painting Calculator
- 00 litres of paint
This is based on a coverage of 10m² per litre of paint. Always check the coverage on the side of the tin before buying.
How to guides
Walls almost always need some surface preparation before you can start painting. Even brand-new plaster needs sealing. You should fill any cracks and holes and make sure all surfaces are clean, smooth and dry. You can paint over emulsion-painted surfaces that are in good condition, but make certain you strip back or sand off any peeling paint.
If you're painting on bare wood, plaster or metal surfaces, you'll get a better result if you use a primer first. It provides a surface which the paint can bond to and stops the paint being absorbed. Find out more what you need and for what surface.
Finding the right combination of colours to match your home and personal taste is essential, but it can often feel like looking for a needle in a haystack.
Choose a convenient delivery date on 1000's of products
45 day returns policy
Customer support team - 0333 014 3357
Free delivery on orders over £50
Home delivery orders placed on diy.com.
Excludes Next Day Bulk delivery goods
This white primer and undercoat has been specially designed to give a stunning finish to your brickwork, cement rendering, concrete, plaster & wood. Simply apply one coat with a brush or roller and leave for 1-2 hours to dry. Covers 13m² per litre on average. Quick drying Low odour
This 5L binding primer from Zinsser is ideal for problem painted surfaces that exhibit chalking, cracking, peeling and flaking, and forms a breathable membrane over faulty substrates around the interior & exterior of your home. It dries in 1 hour and comes in an easily storable tin can. For added ...
Suitable for old roofing felt, tiles, bricks, cracked bitumen and mastic repairs, this waterproof primer and undercoat from the Isoflex Liquid Rubber range has been specially designed for surface preparation of dusty, flaky and old surfaces. Apply with a brush, to provide protection against weathering and will ...
Apply this matt basecoat from the B&Q Smoothwalls range to interior walls and ceilings, using a smoothover toolset, to prepare the surface for painting. It covers textured surfaces; fills cracks, defects and small holes; is simple to use over large areas and will not shrink, sag or crack. It takes ...