Galvanised Steel Sheet Lath (L)2500mm (W)700mm
[This is a block of tabs..]
- For use as a carrier for render/plaster where there is an insufficient key, support and/or risk of cracking
- Use with undercoat plaster or render
- Designed for interior applications with gypsum based undercoat plasters or cement based render
Features and Benefits
This product is available for Bulk delivery for orders over £100. To place an order call 0300 303 4481 or speak to a member of staff in store. Lines open Monday - Saturday 08:00 - 20:00 and Sunday’s 10:00 – 16:00. Calls charged at standard national rate. Free delivery on orders over £250
- Galvanized finish to resist corrosion
- Reduces the risk of cracking in plaster
- Lightweight and easy to handle
- Can span up to 300mm between fixings
Health and Safety
Please note that this item has additional safety or regulatory datasheets available. The product may have possible health and safety hazards covered in these documents. Refer to the container for full information and always follow the instructions.
Help & Advice
- 00 square metres
- 00 rolls of wallpaper
How to guides
Dry-lining a wall means attaching plasterboard to a wall, which gives you a smooth finish to decorate straight away. It's much easier to get a good result this way than with wet plaster and it is easier alternative to re-plastering.
Choose a convenient delivery date on 1000s of products
45 day returns policy
Arrange collection or return to store.Customer support team - 0333 014 3357
Free delivery on standard orders over £50 placed on diy.com
Excludes Large and Bulk delivery
Base sheet in 2 layer traditional roll and pour roofing, use with ROOFTRADE High Performance Underlay. Recycled rag fibre based oxidised roofing membrane with a fine sand upper and lower surface Do not drag rolls across rough surfaces; they should be lifted. Rolls should be stood on their ends on ...
Guarantee - 10 year Durability - Durable
Floor covering, furniture manufacture, packaging, toy manufacture, general DIY To condition: rub clean water into the mesh surface of the board with a brush or clean mop, using about half to 1 litre per 2440x1220x3mm board. The treated boards should be neatly stacked wet side to wet side in an ...