Irwin Panel Saw (L)15"
Irwin Panel Saw (L)15"
[This is a block of tabs..]
With eight teeth per inch, this 15" high quality c75 steel blade panel saw from Irwin is specifically designed for domestic and trade use. The triple ground teeth make short work of the material you need to cut down to size. It comes with an ergonomically designed, soft grip handle so you can work for a prolonged period of time.
- Guarantee - Lifetime
Features and Benefits
Other supplier data: High angled nose increases blade stability
|Colour description||Blue and yellow|
|Rust and wear prevention||Lacquered blade|
|Blade type||High quality C75 steel blade|
|Saw teeth||Triple ground teeth|
|Teeth per inch (TPI)||8|
Help & Advice
How to guides
What are planning and building controls? Why do they exist? Can you deal with them yourself or is it best to ask a specialist? As with any task, you can decide for yourself when you know exactly what's involved.
First of all, it's important to understand what planning and building regulations are. It's easy to think of them as restrictive, bureaucratic tools put in place purely to thwart your ambitions. However, they're essential safety mechanisms which have been designed to protect you, your neighbours and the local environment.
The regulatory bodies will give you permission to carry out your plans unless there are very good reasons not to - in which case they must explain their decision. And if you disagree, you have the right to appeal against it.
Do you know your hacksaw from your hammer? What about bradawls, cross-peins and strap wrenches? There's a whole catalogue of hand tools available and if you're going to do a job correctly, make sure you get the right ones.
Choose a convenient delivery date on 1000s of products
45 day returns policy
Arrange collection or return to store.Customer support team - 0333 014 3357
Free delivery on standard orders over £50 placed on diy.com
Excludes Large and Bulk delivery
No load speed - 3200 rpm Maximum cutting depth at 90° - 91mm Maximum cutting length at 90° of 218mm Maximum mitre left - 52°/Maximum mitre right - 60° Blade diameter - 260mm
This table & mitre saw is ideal for for perfectly cutting mitre & bevel angles through a wide range of materials with a single blade. No load speed - 3500 rpm Maximum cutting depth at 90° - 55mm Maximum cutting length at 90° of 115mm Maximum mitre left - 45°/Maximum ...
With 10 teeth per inch, this 22" rigid blade panel saw from Spear & Jackson is ideal for planed wood, skirting, architraves and dado rails (second fix). It comes with an ergonomically designed, suregrip handle & finger guide so you can work for a prolonged period of time. With a ...