JCB Steel Panel Saw (L)380mm
[This is a block of tabs..]
With 11 teeth per inch, this steel 380mm steel blade panel saw from JCB is ideal for ideal for cutting timber, plastic, pvc and plasterboard, gives a fine cut. It comes with an ergonomically designed, soft grip handle so you can work for a prolonged period of time. With a 45° and 90° angle guide built in, you can easily cut a specific angle with complete accuracy.
- Guarantee - 5 years
Features and Benefits
- SK5 Blade, 11TP1, 0.85mm thick polished blade
- Super-high frequency teeth treatment
- Fine cut - gives smoothest finish to cut edge
|Colour description||Yellow & Black|
|Blade type||Steel blade|
|Teeth per inch (TPI)||11|
|Type of cut||Fine cut|
Help & Advice
How to guides
What are planning and building controls? Why do they exist? Can you deal with them yourself or is it best to ask a specialist? As with any task, you can decide for yourself when you know exactly what's involved.
First of all, it's important to understand what planning and building regulations are. It's easy to think of them as restrictive, bureaucratic tools put in place purely to thwart your ambitions. However, they're essential safety mechanisms which have been designed to protect you, your neighbours and the local environment.
The regulatory bodies will give you permission to carry out your plans unless there are very good reasons not to - in which case they must explain their decision. And if you disagree, you have the right to appeal against it.
Do you know your hacksaw from your hammer? What about bradawls, cross-peins and strap wrenches? There's a whole catalogue of hand tools available and if you're going to do a job correctly, make sure you get the right ones.
Choose a convenient delivery date on 1000s of products
45 day returns policy
Arrange collection or return to store.Customer support team - 0333 014 3357
Free delivery on standard orders over £50 placed on diy.com
Excludes Large and Bulk delivery
This table & mitre saw is ideal for for perfectly cutting mitre & bevel angles through a wide range of materials with a single blade. No load speed - 3500 rpm Maximum cutting depth at 90° - 55mm Maximum cutting length at 90° of 115mm Maximum mitre left - 45°/Maximum ...
This corded reciprocating saw is ideal for cutting wood, metal and plastic. 2700 rpm no load speed Maximum cutting capacity of 300mm on wood and 10mm on metal Stroke length of 28mm Tool free blade change Comes with 1 x wood blade, 1 x metal blade, 1 x hex key ...
This corded reciprocating saw is ideal for cutting wood, metal and plastic. 0-2700 rpm no load speed Maximum cutting capacity of 100mm on wood and 10mm on metal Stroke length of 20mm Tool free blade change Comes with 1 blade for wood cutting & 1 blade for metal cutting