Mac Allister Heavy Duty 600mm Tile Cutter
[This is a block of tabs..]
This Mac Allister Heavy duty 600mm tungsten carbide tile cutter with it's 22mm cutting wheel, is suitable for cutting ceramic, quarry, porcelain, vitrified and terracotta tiles and will give you precise cuts in tiles up to 14mm thick.
- Guarantee - 2 years
Features and Benefits
- This tile cutter includes an angle cutting guide and extension arm
- This cutting wheels are replaceable with YG6X, 22 x 6 x 2mm
|Maximum cutting capacity||14mm|
|Maximum cutting length at 45° bevel||420mm|
|Blade tip type||Tungsten carbide|
Help & Advice
How to guides
You should normally paint your walls and ceilings with emulsion, acrylic or water-based eggshell. Non-drip emulsion is also available in jelly or solid form, and this is particularly good for ceilings. Never stir non-drip paint, no matter how lumpy it looks. You'll cause the gel structure to break down, and the paint will lose its non-drip quality.
If you're painting on bare wood, plaster or metal surfaces, you'll get a better result if you use a primer first. It provides a surface which the paint can bond to and stops the paint being absorbed. Find out more what you need and for what surface.
Choose a convenient delivery date on 1000s of products
45 day returns policy
Arrange collection or return to store.Customer support team - 0333 014 3357
Free delivery on standard orders over £50 placed on diy.com
Excludes Large and Bulk delivery