Mapei Fast Set Powder Flexible Adhesive, Grey 20kg
Unavailable for Home delivery. Please check your local store stock.
- Click & Collect Order by 7pm (4pm Saturday & Sunday) for next day Click & Collect - Select store
- 45 day returns policy. Read our returns policy
[This is a block of tabs..]
This flexible adhesive is waterproof and suitable for ceramic, porcelain and natural stone tiles.
- For use on - Concrete, plywood overlaid floors, plaster, plasterboard & timber
- Flexible for where limited movement is likely e.g. wooden or heated floors
Features and Benefits
- Flexible fast setting cement based adhesive C2F
- Suitable for interior and exterior use
|Location||Internal & external|
|Ready to grout||3hours|
|Coverage||Up to 8m²|
Help & Advice
- 00 Total area to cover in m2
- 00 No of tiles required
The number of tiles includes a 10% wastage allowance and is only given as an estimate
How to guides
When you've fixed all your tiles to the wall, you should leave them for the adhesive to dry. How long this takes depends on the adhesive you use, so it's best to check the manufacturer's instructions. Then you can finish off all the joints with grout (special hard filler). To finish off your tiling, you might also need to add a waterproof seal along the bottom of a splashback, and possibly mount some fixtures too.
There are lots of good general-purpose adhesives on the market, but for some materials you need something that's specially designed. Our guide will help you decide what is best for the job.
Choose a convenient delivery date on 1000s of products
45 day returns policy
Arrange collection or return to store.Customer support team - 0333 014 3357
Free delivery on standard orders over £50
Excludes Large and Bulk delivery
This pack of self adhesive plasterboard repair patches has been specially designed for making permanent repairs to damaged plasterboard, with their aluminium construction. Guarantee - 1 year Accessories included - Patches included: 2 - 50x50mm, 5 - 100x100mm, 5 - 150x150mm
Use a Flashing primer before application, non-porous surfaces do not require primer but using it would improve the adhesion. Surface preparation:All surfaces should be dry, clean & free of loose or flaking material, dust & grease. Areas of rust should be thoroughly wire-brushed & treated with a rust ...