Ronseal Diamond Dark Oak Satin Floor Varnish 2500ml

Product rating
3.7 out of 5 stars
Product code:
5010214856602

Price

£49.84

£19.94 per L

Ronseal Diamond Dark Oak Satin Floor Varnish 2500ml

Product code:
5010214856602
Ronseal Diamond Dark Oak Satin Floor Varnish 2500ml Ronseal Diamond Dark Oak Satin Floor Varnish 2500ml

Price

£49.84

£19.94 per L

Please select delivery method
  • Home Delivery Order by 7pm (4pm Saturday & Sunday) for next day delivery.
  • Click & Collect Order by 7pm (4pm Saturday & Sunday) for next day Click & Collect - Select store
Brand
Ronseal logo

Product notices

Add to basket

[This is a block of tabs..]

Product Details

Product Information

This dark oak floor varnish from the Ronseal Diamond range can be applied to interior bare or varnished wooden floors using a brush. The varnish dries in just 30 minutes and will cover up to 18 m² per litre on average.

Features and Benefits

Spend less time varnishing your floors and more time enjoying it with this Perfect Finish Diamond Hard floor varnish. It comes with the Perfect Finish applicator which has a long handle, taking the backache out of varnishing your floor. The Perfect Finish pad applies the optimum amount of varnish, so you don't get any brush marks, and is 5 times faster than using a brush. It's also the toughest varnish Ronseal do, so it'll last, keeping your wooden floors protected and looking great for longer.

  • Non-yellowing so you won't need to reapply as often
  • Quick drying in just 30 minutes
  • Ensures your wooden floors are protected and stay looking great
  • Low odour so it's more pleasant to use
  • Includes Perfect Finish applicator, 5x faster than using a brush

Technical Specifications

Technical specification of Ronseal Diamond Dark Oak Satin Floor Varnish 2500ml
Brand Ronseal
Range Diamond
Colour description Dark oak
Surface finish Satin
Coverage Up to 18 m² per litre
Durability Diamond hard protection
Drying time 30minutes
Recoat time 2hours
Location Interior
Paint/Stain/Varnish base Water-based
Protection Diamond Hard protection against knocks scratches & spills
VOC description Minimal
Application Brush
For use on Bare or varnished wooden floors
Touch dry time 30minutes
Paint type Varnish

Health and Safety

Please note that this item has additional safety or regulatory datasheets available. The product may have possible health and safety hazards covered in these documents. Refer to the container for full information and always follow the instructions.

Help & Advice

Wall Painting Calculator

Your requirements

1. What are the wall dimensions?
X
2. What are the dimensions of the windows / areas that you don't want to cover in metres?
X
3. How many doors in the room?
4. How many coats of paint do you want?

Your results

You require:

  • 00 litres of paint

This is based on a coverage of 10m² per litre of paint. Always check the coverage on the side of the tin before buying.

How to guides

How to prepare a wall for painting

How to prepare a wall for painting

While it can be tempting to get painting as soon as possible when you want to decorate a room, it’s worth taking the time to make sure your room and surfaces are best prepared before you begin. Getting the preparation right is crucial to achieving the perfect finish. It’ll also help to keep things neater and cleaner, and reduce the need for additional coats of paint. No paint can completely cover dirty or uneven surfaces, so tackling this at the start of the project avoids the need for extra work later on.

In this guide we’ll walk you through the most important steps to take, and show you how to;

  • Empty your room ready for decorating, and protect fixtures and fittings you aren't painting
  • Clean your walls to help paint adhere
  • Fill holes and cracks and smooth your walls for the best possible finish
  • Prime stained surfaces or those which have not been painted before

Once you've completed these tasks you should have a smooth, even surface ready to be painted.

Walls painted green with white trim

Buying guides

Primer buying guide

Primer buying guide

If you're painting on bare wood, plaster or metal surfaces, you'll get a better result if you use a primer first. It provides a surface which the paint can bond to and stops the paint being absorbed. Find out more what you need and for what surface.

Reviews 3.7  out of 5 stars

Ronseal Diamond Dark Oak Satin Floor Varnish 2500ml is rated 3.7 out of 5 by 7.
  • y_2017, m_11, d_23, h_2
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.3
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_7
  • loc_en_GB, sid_5010214856602, prod, sort_[SortEntry(order=RATING, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_diy
Rated 5 out of 5 by from Pictures Hi If anyone could post pictures of how this looked on their floor that would be great! As it is difficult to accurately see the colour from the small square on the front of the box.
Date published: 2015-03-13
Rated 5 out of 5 by from Easiest job in the world. Decided to re-do my kitchen floor after an (ex) friend recommended a bunch of cowboys to us when we moved in. Sanding was an issue becuase of the rubbish they put on our floors, The floor varnish was the easiest bit. The application was easy as pie, both me and my wife shared the work, only because she was itching to have a go! Difficult to get wrong, difficult to make a mess of. You won't find a DIY task made any easier than this!
Date published: 2015-01-19
Rated 4 out of 5 by from Floor varnish Have previously used this product which lasted several years and was again very pleased with the outcome on my floors.
Date published: 2016-12-19
Rated 4 out of 5 by from Great hard wearing varnish I have used this exact varnish every year now for my wood floor in a busy shop and it does a great job. It looks really good when finished and wears well with a heavy traffic area. Would recommend. Pricey but worth it.
Date published: 2015-02-09
Rated 3 out of 5 by from Ok in the end- but I expected more than just ok. Firstly I think the packaging is poorly designed. Why have the applicator in a tub that sits in the varnish so it drips everywhere when you remove it - mad! Granted it warns you abou this on the tin , but really??!! All prep work was carried out to the letter. Then the fun began..... My parquet floor in the hall is a little uneven in places through wear and tear, as it has been in the house since it was built in the 50s. This presented me with some difficulty as the applicator pad couldn't cope with the changes in levels so I had to resort to my hands and knees and a brush anyway. The first two coats went on well and the floor was looking good. Then I went out and bought the specific grade of sandpaper recommended and lightly sanded it ready for the final coat. Trust me, I am by no means heavy handed, but it left my floor really patchy - and not just on the uneven areas. I had to go round with a brush and touch up the lighter areas and then wait for that to dry before adding the final coat, adding an extra 3 hours to the job. The final outcome is ok but I think I can still see the patches, but this may just be me since I know they were there - my husband says it is fine. As the same flooring runs from my hall through to the lounge and dining room the plan was to strip and revarnish that too. I now have the dilemma of whether to varnish it or put down a carpet. Sadly after this experience I think the carpet may win ....
Date published: 2016-02-12
Rated 3 out of 5 by from Should be called 'all right' finish Before I embarked on my floorboard sanding/varnishing project at home I was warned by several friends/ family members (who are in the trade) that this is a job that should be left to a professional as it is very easy to get wrong. Spurred on by my lack of money and my desire to restore my floorboards I gave it a go. It was hard work, but worth it. My floor looks all right. After a couple of days spent attacking the knackered old boards with my belt sander I went with the Ronseal diamond hard dark oak with the 'perfect' finish pad - mainly because the instruction vid on the Ronseal website made it look falling-off-a-log easy to get a pristine shiny new floor. I must stress that it is NOT as easy as it looks. In order to get the floor to be a uniform depth and shade you have to be extremely careful in how much varnish is on the pad, and in how hard you press and how fast you move it whilst applying. Make sure you work very slowly and carefully two boards at a time, watching the boards like a hawk as you go. If you fail to notice any bubbly bits, drips or tramlines strait away then they will be there for good after only a few minutes drying time. If there are any imperfections at all then you must go back over them whilst the varnish is still runny. I don't want to make this sound like a terrible product. I'm sure my floor looks way better than it would have if I'd used a budget brand of varnish and a plain old brush, but 'perfect' finish it is not. If you want a perfect finish, for the love of god hire a professional!
Date published: 2012-03-15
Rated 2 out of 5 by from A gimmicky product! The varnish drys too quickly and becomes very tacky before you have time to work it along the grain of the wood. The paint pad doesn't work very well and starts to disintegrate after a period of time plus the pole is unstable. Take my advice take your time and methodically apply this varnish with a good quality brush for a good result!
Date published: 2016-11-08
  • y_2017, m_11, d_23, h_2
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.3
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_7
  • loc_en_GB, sid_5010214856602, prod, sort_[SortEntry(order=RATING, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_diy

Product reassurances

Choose a convenient delivery date on 1000s of products

45 day returns policy

Arrange collection or return to store.
Customer support team - 0333 014 3357

Free delivery on standard orders over £50

Excludes Large and Bulk delivery

Related Products

Colours Clear Satin Floor Varnish 2500ml
This clear floor varnish from Colours can be ...
Colours Clear Satin Floor Varnish 2500ml
Description:
This clear floor varnish from Colours can be applied to interior bare or varnished wood using a brush. The low odour, non yellowing varnish takes 1 hours to dry and will cover 20 m² per litre on average. Safety data sheets for B&Q products Find out more about Safety ...
Ronseal Interior Diamond Hard Clear Satin Interior Varnish
This clear interior varnish from the Ronseal Interior ...
Ronseal Interior Diamond Hard Clear Satin Interior Varnish
Description:
This clear interior varnish from the Ronseal Interior diamond hard range can be applied to interior using a brush. The varnish dries in just 20 minutes and will cover up to 24 m² per litre on average. Easy to use Dries in just 20 minutes Diamond Hard durability and protection ...
Ronseal Interior Diamond Hard Dark Oak Gloss Interior
This dark oak interior varnish from the Ronseal ...
Ronseal Interior Diamond Hard Dark Oak Gloss Interior
Description:
This dark oak interior varnish from the Ronseal Interior diamond hard range can be applied to interior interior wood using a brush. The varnish dries in just 20 minutes and will cover up to 24 m² per litre on average. Easy to use Dries in just 20 minutes Diamond Hard ...
Ronseal Interior Diamond Hard French Oak Satin Interior
This french oak interior varnish from the Ronseal ...
Ronseal Interior Diamond Hard French Oak Satin Interior
Description:
This french oak interior varnish from the Ronseal Interior diamond hard range can be applied to interior interior wood using a brush. The varnish dries in just 20 minutes and will cover up to 24 m² per litre on average. Easy to use Dries in just 20 minutes Diamond Hard ...