Rated 5 out of
this has been so great in the last few days with all this rain, I am now able to save all the water I need with this wonderful piece of plastic, it didnt take long to fix either.
Date published: 2012-06-12
Rated 4 out of
Installed this along with a Sankey 210lt butt, and installation was straight forward although the diagrams could have been clearer.
One minor problem is that the inlet/outlet should be attached to a vertical side, well the Sankey butt is nicely rounded along way down from the top so getting a horizontal outlet can be tricky. I mounted mine near the top at an angle, flexed it down horizontal (very easy to do) with a wooden spoon through it's centre, then heated the surrounding plastic of the butt with a hairdrier to soften it. Hold it in place until the plastic cools and voila the nozzle is horizontal.
It rained after fitting and the butt was full in 2 hours and overflowed correctly.
Date published: 2013-07-29
Rated 4 out of
Does the job
Would work fine on standard down pipe but I needed it for the down pipe on my greenhouse (40mm) and had to modify it extensively for it to fit. A conversion kit needs to be available.
Date published: 2012-05-09
Rated 3 out of
Bought this with the 100l Sankey waterbut.
Have to agree with the previous review, instructions could be a bit better. You just need to think a bit to make sure the diverter is the right way up.
Main thing is the hole you need to cut in the waterbut side for the pipe fitting. (As previously mentioned)
You need to try and make sure you drill horizontally if possible, as the cutout position was not perfectly horizontal. Good tip from previous reviewer. Although you shouldn't really have to, and the butt in the pic shows one with a recessed blank that's the correct angle.
But overall a good buy.
Date published: 2014-07-13
Rated 2 out of
Good product but wrong size for my downpipe and no other sizes available. Pity as I have successfully used this product before. Struggling to know what to do next!
Date published: 2011-10-13