Unibond Charcoal Ready Mixed Grout
[This is a block of tabs..]
This ready mixed grout is suitable for use with underflooring heating and for ceramic tiles & porcelain. Simply apply and leave for 24 hours to dry. Each pack covers 8 m² on average.
- Guarantee - 20 years
- Resistance - Waterproof
Features and Benefits
- In case of contact with eyes rinse immediately with plenty of water
- Avoid contact with skin and eyes
Health and Safety
Please note that this item has additional safety or regulatory datasheets available. The product may have possible health and safety hazards covered in these documents. Refer to the container for full information and always follow the instructions.
Help & Advice
- 00 Total area to cover in m2
- 00 No of tiles required
The number of tiles includes a 10% wastage allowance and is only given as an estimate
How to guides
When you've fixed all your tiles to the wall, you should leave them for the adhesive to dry. How long this takes depends on the adhesive you use, so it's best to check the manufacturer's instructions. Then you can finish off all the joints with grout (special hard filler). To finish off your tiling, you might also need to add a waterproof seal along the bottom of a splashback, and possibly mount some fixtures too.
There are lots of good general-purpose adhesives on the market, but for some materials you need something that's specially designed. Our guide will help you decide what is best for the job.
Choose a convenient delivery date on 1000s of products
45 day returns policy
Arrange collection or return to store.Customer support team - 0333 014 3357
Free delivery on standard orders over £50
Excludes Large and Bulk delivery
This floor tile adhesive & grout is waterproof and suitable for ceramic floor tiles, max size 300 x 300 mm For use on - Porous concrete and wooden floors Recommended for - Bathrooms, kitchens and hallways Water, heat and mould resistant Flexible for where limited movement is likely e.g. wooden ...
This 2.5kg wall & floor grout is use with underfloor heating & timber floors on for ceramic tiles, concrete, natural stone, plaster, plasterboard, porcelain & timber. Simply apply and leave for 24 hours to dry. Each pack covers up to 8 m² on average. Guarantee - 1 year Resistance - ...