Zinsser Watertite White Smooth Waterproofing Paint 5L Tin
[This is a block of tabs..]
Ideal for cellars, this white waterproofing paint from the Watertite range by Zinsser has been specially designed to give a stunning finish to masonry around your home. Simply apply with a brush and leave for 2-4 hours to dry - a great way to revamp your home. Covers 2m² per litre on average.
- Guarantee - 1 year
|Coverage||2m² per litre|
|Durability||Guaranteed to stop water|
|Touch dry time||60minutes|
Health and Safety
Please note that this item has additional safety or regulatory datasheets available. The product may have possible health and safety hazards covered in these documents. Refer to the container for full information and always follow the instructions.
Help & Advice
Wall Painting Calculator
- 00 litres of paint
This is based on a coverage of 10m² per litre of paint. Always check the coverage on the side of the tin before buying.
How to guides
Walls almost always need some surface preparation before you can start painting. Even brand-new plaster needs sealing. You should fill any cracks and holes and make sure all surfaces are clean, smooth and dry. You can paint over emulsion-painted surfaces that are in good condition, but make certain you strip back or sand off any peeling paint.
If you're painting on bare wood, plaster or metal surfaces, you'll get a better result if you use a primer first. It provides a surface which the paint can bond to and stops the paint being absorbed. Find out more what you need and for what surface.
Finding the right combination of colours to match your home and personal taste is essential, but it can often feel like looking for a needle in a haystack.
Choose a convenient delivery date on 1000s of products
45 day returns policy
Arrange collection or return to store.Customer support team - 0333 014 3357
Free delivery on standard orders over £50 placed on diy.com
Excludes Large and Bulk delivery
You can apply this shed & fence treatment from the Cuprinol 5 Year Ducksback range to fences, sheds & other rough sawn garden wood, using a brush or roller, to colour and provide protection against weathering. It takes 2-4 hours to dry and will cover up to 5m² on average. ...
You can apply this shed & fence stain from the Colours Timbercare range to fences, sheds & other rough sawn garden wood, using a brush, to colour and provide protection against weathering. It takes 2 hours to dry and will cover up to 6m² per litre on average. Colours and ...
You can apply this matt wood preserver from the Ronseal Total range to bare or previously preserved wood, using a brush, to provide protection against wear and tear. It takes 24 hours to dry and will cover up to 8 m² per litre on average. Prevents rot and decay & ...
This yacht varnish from the Ronseal Exterior varnish range can be applied to external bare or previously varnished or stained wood & trim using a brush. The varnish takes 4 hours to dry and will cover up to 16 m² per litre on average. Long lasting protection Waterproofs and protects ...