Clever technology for easy installation. Gainsborough’s Digital shower is a new concept in showering, designed to make it a delight to use and install. Installing the Gainsborough Digital means minimum disruption. The job can be done quickly and easily and because it takes less time and work it will save you money too.
Central to the Gainsborough Digital is the remote’ processor which replaces the traditional valve and pump usually installed on, or behind the bathroom wall. The digital processor blends the hot and cold water and is around the size of a shoe box. It can be sited up to 10 metres away from the shower control in a convenient location – in the loft, under the bath or in an airing cupboard for example. A low voltage data cable connects the digital processor to the shower control.
The control itself is surface mounted with just 4 screws. Water is fed through a supply pipe that’s discreetly hidden inside the riser rail and out via a stylish 3-mode showerhead. This shower should only be used with Gravity Fed water systems with dedicated feeds and should not be used with a separate booster pump.
Chrome pumped EAN 5016252260821
Chrome unpumped EAN 5016252260814
Gloss white finish
This shower should only be used with Gravity Fed water systems with dedicated feeds and should not be used with a separate booster pump.
Satin chrome pumped
Satin chrome unpumped
Unpumped* Satin chrome finish
Pumped* Satin chrome finish
* Suitable for all High Pressure systems/Combi Boilers
** Suitable for all Gravity Fed systems
© B&Q 2014 - Terms & Conditions