Tackling an electrical or wiring job? You'll need the right tools to hand. We've a whole catalogue of specialist tools - from resistance testers and side cutters to wire strippers.
A brief guide to the kinds of tools you'll need for the most common electrical and wiring jobs. Don't forget, choosing the right tools will help you to complete your job efficiently and safely. Look for those with insulated handles and other safety features to help protect you from accidents.
Continuity, resistance and voltage tester
This three-in-one battery-powered tool can test whether a cable is part of a continuous circuit, measure the resistance of a component or circuit and test for AC and DC voltages.
Hand lamp or torch
Whenever you have to work without light or power, you will need a good battery-powered torch or lamp.
Long nose pliers
For bending, twisting and positioning cable cores. Available with insulated handles for extra safety.
Side cutters or snips
The best tool for cutting cables to an exact length.
Useful for installing flush-mounted socket boxes. The hard plastic guide provides an easy-to-use drilling template to hollow out a wall cavity.
A plug-in tester that confirms that a circuit is dead and therefore safe to work on. It also tells you whether or not a socket is wired correctly.
For tightening small terminal screws only, as the driver blade is too delicate for anything else.
Test that a lighting circuit is dead with a voltage meter or tester.
Great for removing the insulation from cables and flex cores. Its jaws accommodate most core diameters.
For more help and advice completing electrical tasks around the home, watch our videos below - How to change and plug and fuse and How to change a light switch