Roxil Wood Preserver (5L Clear) Odourless, Advanced Protection Against Dry Rot, Wet Rot, Fungal Attack and Woodworm Infestation

• Wood Preservative
• Suitable for Bare wood
• Any paint, varnish, dirt or other surface coating should be removed before application, sanding may be required to return the wood to a sound surface. Wood should be clean and free from dust and other contaminants, use a suitable cleaner. If using a pressure washer ensure low pressure is used and allow 24 hours or more for timbers to fully dry before further treatment. Timber to be treated should be reasonably dry before treatment although the product will penetrate into damp timbers. Do not apply if rain is forecast in the next 48 hours to allow time for Roxil Wood Preserver to dry and the application of a top coat.
• This product must only be used on outdoor wood which is not in direct contact with soil or surface water. Due to the biocidal components, this product is not suitable for outdoor tables which may come into contact with food. Roxil Wood Protection Cream is instead recommended for this application. Do not apply by spray. Apply by brush onto timber at a rate of 5 m2 per litre. Apply in 2 – 3 coats depending on the porosity of the wood species. After application tools should be cleaned immediately with warm, soapy water.
• Guarantee - Statutory

Features and benefits

Roxil Wood Preserver is a solvent-free liquid wood preservative designed to protect timber against dry rot, wet rot and woodworm. The powerful formulation can be applied by brush or roller to help protect outdoor wood such as: fences, decking, sheds, garden furniture and more.

• Roxil Wood Preserver is a solvent-free liquid wood preservative designed to penetrate deeply into timber and defend against dry rot, wet rot, fungal attack and woodworm infestation.
• Easy to apply - this powerful formulation can be applied by brush or roller to help protect outdoor wood such as: fence, decking, sheds, garden furniture and more.
• Clear, Odourless formula – Increases the lifetime of timber by preventing wood destroying, wood discolouring fungi and woodworm.
• HSE Approved. Tested to European standards EN 152, 113 and 46-1. Designed to be used as a pre-treatment before application of Roxil Wood Protection Cream.
• Apply by brush onto timber at a rate of 5 m2 per litre. Apply in 2 – 3 coats depending on the porosity of the wood species. Do not apply if rain is forecast in the next 48 hours to allow time for Roxil Wood Preserver to dry and the application of a top coat.