2.4m Cobble Stone Effect Lawn Edging - Weatherproof Garden Border Flower Bed Staked Fence Strips - 10 Piece, Each W24 x H10cm

Create a Lakeland stone border in an instant with these attractive cobble stone effect garden edging strips. Keep your lawn and flowerbeds neatly separated with this attractive hammer-in edging. Made from strong flexible everlasting ABS polymer material with a stone effect moulding on the facing side. Simple tongue and groove assembly. Each section locks into the next to create straight or curved shapes around trees, shrubs, lawns and flower beds. Eliminates the need for constant grass edging, trimming and reduces weed transfer. To install them in your garden, simply line them up and hammer them in. The soil should be loosened and stone free before being pushed into the ground as the edging is made from plastic. The pieces are fairly rigid and do not bend easily. However, conjoined pieces may 'turn a corner' up to around 30 degrees. For right angle corners you will need to use separate lengths that are not joined at the corner. Ideal for sloping gardens - the pieces can be 'stepped' one higher than the next. This is ideal for gardens that rise or fall or are not on level ground. Dimensions: The 'above ground' area of each piece is 24cm (9.5") wide and 10cm (4") tall. Plus, there is a ground spike measuring 12.5cm (5") tall and up to 5.2cm (2"). The maximum depth of the spike is 0.5cm (3/16") and the maximum depth of the 'above ground' area is 2cm (0.75") (including slots for joining). There are 10 pieces per set, giving a total length of 2.4m (8ft). Buy as many sets as you need - several sets will slot together continuously as required.