CHARNWOOD BB27 Bandsaw Blade 1826mm x 13mm x 6tpi for B250, Made In UK

Manufactured in Great Britain.

Designed for all types of wood cutting, including contours, our Premium bandsaw blades feature a spring tempered high carbon steel blade with induction re-hardened teeth to 62HRC, providing decreased production times, better surface finish, increased fatigue resistance and longer blade life.

Ground teeth assure precision cutting, better finish and less kerf loss.

High carbon steel body hardened and tempered to 45 Rockwell C Hardness withstands greater cutting pressures and optimises fatigue strength.

Faster and more precise cuts.

Hardened teeth to 62HRC ensure longer life.

Teeth can be re-ground or re-shaped and re-set.

Lower cost per cut.

When we first tested these new blades we couldn’t believe the high cutting speed compared to a standard blade. Furthermore the high cutting speed was achieved without any compromise on the finish.

After longer testing it was noticeable that the cutting edge remained sharp long after standard ‘unground’ blades would have blunted.

Charnwood BB27 Specification

Blade Length: 1826mm (71-7/8″)

Blade Width: 13mm (1/2″)

Blade Thickness: 0.5mm (020)

Teeth per Inch: 6

Tooth Pattern: Skip

Material: High Carbon Steel

Tooth Finish: Ground

Suitable for use with;

All types of wood including nail embedded wood.

Non-ferrous metals.

Plastic and Acrylic.

For use with Charnwood model B250 and similar bandsaws.

Compatible blade for Lumberjack BS254