Kair 90 Degree Vertical Elbow Bend 180mm x 90mm - 7 x 4 inch Rectangular Plastic Ducting Adaptor

Kair Rectangular 180mm x 90mm / 7 x 4 inch Flat Ducting 90 Degree Vertical (Upward) Elbow Bend.

Both sides are female sockets. The ends will fit over 150mm ducting system 180mm x 95mm flat ducting pipe Part: DUCVKC651.

Designed for use with medium capacity extraction systems and cooker hoods. It is perfect for flush fitting against ceilings and walls and can be concealed above wall units or inside ceiling voids.

Static Pressure Drop in Pascals: 15 l/s = 0.36 Pa - 30 l/s = 1.13 Pa - 60 l/s = 3.53 Pa.

Airflow performance independently tested by BSRIA or BRE

Max / Min Temperature: +60c / -15c.

Made in the UK using strong high-quality white polystyrene / polypropylene material.

Installation Tips:

Kair plastic ducting pipe is lightweight & easy to install. You simply push-fit the duct pipe and fittings together.

For permanent fixings, you can seal the joints with a method of your choice (Popular options include silicone sealant, solvent cement, or tape).

Rectangular plastic ducting can be carefully cut to the required size using a hacksaw. Offcuts are always useful to keep to hand for joining two female fittings together. If your duct run passes through a particularly cold area, we would recommend considering using our pre-insulated ducting to avoid condensation building up within your ductwork.