See more Shower head kits
3-spray pattern Chrome effect Shower riser rail kit
This shower kit from has a chrome effect finish, and is ideal for changing the appearance of your bathroom or shower enclosure. It comes with fixings supplied, for easy and quick installation.
- Assembly required
- Fittings & fixings included
- Guarantee - 2 years
- Comes with 1x shower head (3 functions), 1x fixed overhead, 1x hose 1.5m(Φ9mm),1x hose 0.6m(Φ9mm), 1x riser rail 90cm(Φ22mm), 1x shower head holder
Features and benefits
- Easy clean : The shower head is equipped with rubber nozzles making it easier to clean.
- Riser rail with adjustable settings.
- This shower head has 3 different jet types for you to set ideal shower.
- Comes complete with soap dish.
|Maximum operating pressure||5bar|
|Minimum operating pressure||0.5bar|
|Product type||Shower riser rail kit|
|Shower head spray patterns||3-spray pattern|
|Shower rail height||900mm|
Shockingly poor quality, do not buy this product
Dean deano - 30 days ago
The overall quality of the product feels cheap. The fixings are plastic and almost impossible to get a solid fixing to the wall , the mounts don’t allow you a good enough fixing to prevent movement. The hole thing moves and it’s obvious that it will not sta
Looks nice, but not very good.
Grumpy engineer - 9 months ago
I bought this on 4th July, box was a bit tatty but all the parts were there, so took a chance.
No assembly instructions, just illustrations, assembled parts on the floor as a dry run before drilling holes in wall. OK so far.
The first problem after fitting the riser to the wall was the friction on the adjustable parts i.e soap dish and hand shower was greater than the clamping affect the wall brackets, so if you moved one all will move including the riser.
Second problem the diverter valve does not seal properly so you cannot shut one shower head down completely whilst using the other.
Third and most serious, the riser pipe to the fixed shower head the only solid pipe in the whole assembly had a minute pin hole halfway round the bend at the top which made the complete shower not fit for purpose. I did not spot this fault until I noticed a small amount of water running down the wall about 2 feet from the riser pipe. Standing on the side of the bath I got a face full mist and on closer inspection found the hole, you need a magnifying glass but it there. I am not Happy.
Bluebirds1927 - 1 year ago
This is absolutely shocking. The head is too close to the wall and it has taken the power from the water flow. Hard to seal the connection to the mixer valves even with two rubber seals fitted. Had to tighten it so hard that connection is damaged so can't even take it back. Came with parts missing.Shocking!
Fixed Head Poor Spray
Tigeroy - 1 year ago
I bought this product, then read the reviews and decided to test it before drilling wall holes. I assembled and tested most of the items on the floor; good so far. Then connected to the water supply, turned on, no leaks.
But what a terrible waterfall like spray from the fixed head, too many and too large holes in the head, and too small (1/4" dia) hole in the inlet valve. We have decent water pressure here.
The head has to be close to the wall, so it has to spray out at an angle. The spray pattern is not maintained and the large droplets coalesce. Would be OK if dropping down vertically and one wanted the under-the-Hawaiian-waterfall effect.
So far I haven't decided whether to keep this unit and use my old head, or try for another model.
Poor Quality .. Leak everywhere
Yogesh - 2 years ago
I bought this yesterday from BnQ Ilford and fixed. there are few problems which I this is never thought of by Manufacturer. the actual rail does't fix and on the bracket provided and keep sliding down . also keep rotating so feel that shower head will fall very quickly. also the hose connector provided are not of good quality. Need to do some extra arrangements to fix this shower so that it doesn't move left / right and up and down. Also rain shower head is leaking and I need to attach some additional washers to fix the leak.
Spend some extra money and buy some good product. this is not cheap to buy but truly let down by quality