See more 4 Panel Doors
4 Panel Oak veneer Internal Door, (H)1981mm (W)686mm
Allows light to penetrate through from one space to another which is ideal for dark hallways
- Guarantee - 1 year
- Fixings not supplied
Features and Benefits
- Ready to stain or varnish
- Made from responsibly sourced, Forest Friendly timber
Health and Safety
Please note that this item has additional safety or regulatory datasheets available. The product may have possible health and safety hazards covered in these documents. Refer to the container for full information and always follow the instructions.
|Height (mm)||1981 mm|
|Width (mm)||686 mm|
|Thickness (mm)||35 mm|
|Weight (g)||23500 g|
|Door construction||Engineered construction for greater stability|
|Timber approval||FSC® approved|
Do not buy if not perfect size.
Gervasio - 2 years ago
I have bought this door hoping I could slightly adjust it for my opening. It Turns out that there are just a couple of millimetres to play with. The door had to go in the skip. Such a waste. I think the description of the item is misleading, should I known that in advance I would have saved money time and resources.
Fairycandytuft - 4 years ago
But - warning - there isn't much wood to play with on the sides of these doors - if you have to cut too much off you are down to the core.
We had to return 1 door - 10 months after buying it - however returned to store no problem - but had to build up a frame for a smaller size door - the look isn't quite what I wanted overall but thankfully it was only the 1.
9 doors in total very happy otherwise - looking good! :)
Damaged in handling - twice!
quakerdave - 4 years ago
Whilst this product in its pristine condition looks great, the first one to come had veneer damage that wasn't obvious until all the packaging was removed. A replacement was easily and speedily arranged but was also damaged by an impact, again not visible until all the packaging was removed. Eventually we had to accept this one as the carpenters were in the middle of the fitting of the set. They remarked at the poor quality chipboard interior core of the doors as the hinge screws, when tightened were running round and they advised not removing the these screws from the door for the final varnishing but to leave the hinges and other furniture on it.