See more 6 panel doors
6 panel Unglazed White Internal Door & frame set
The Easy Fit door set is a door and frame, already cut and routered for hinges and latch, ensuring it is easy to fit with no joinery expertise or specialist tools. The hinges, latch and latch plate are included so all you need to do is fix it into the door opening and add a handle. You can replace your existing door quickly and easily, just measure your existing opening to determine which size you require.
- Compatible with For opening sizes (W)683-695mm x (H)1988-1996mm x (D)35mm
- 10 years Guarantee
- Handles sold separately
- Door, frame kit, hinges & latch plate supplied - handles not included
- Pre-painted white - no further decoration required
Features and benefits
The Easy Fit door range is an interior door system so simple anyone can fit in minutes without being an expert, or the need of a joiner. Suitable for most standard sized door openings.
- This door can be hung left or right handed so you choose which way it opens
- For opening sizes (W)683-695mm x (H)1988-1996mm x (D)35mm
- To give you the flexibility to choose the style and finish you want, our doors are sold without handles
- Easy lift off hinges to swap or remove doors easily
- Includes door and frame kit, hinges, latch and latch plate - all you need are the handles
- Made from responsibly sourced, Forest Friendly timber
- This product is to be installed within an existing door frame, and is not suitable for new apertures
Health and safety
Please note that this item has additional safety or regulatory datasheets available. The product may have possible health and safety hazards covered in these documents. Refer to the container for full information and always follow the instructions.
|Door opening action||Left & right handed|
|Number of panels||6|
Good door frame set
DanF90 - 2 years ago
Good set that is easy to fit for a moderate DIYer. Only comment would be to supply your own wood screws as the ones that come with the kit round off very easily
Not So Easy To Fit
Anonymous - 4 years ago
I have bought a house recently, and a few of the doors need to be replaced. I saw these doors on the B&Q website, and thought I would try one, just to see how easy it is to fit.
My DIY skills are low to moderate, so I thought this would be a job I was more than capable of doing.
I did all the measurements, but did not think too much about the height as they are all the same height regardless of width.
That is where my problem starts.
My frame height is 1955mm. Silly me for thinking that it was ballpark for a doorframe. If they had offered a different length door, I am sure I would have looked a lot closer at that measurement.
I am sure a normal door could be trimmed to the right height, but these can only be done to 8mm? Even then the instructions only mention trimming the side strips, not the door itself.
I think that I will get a joiner to fit some basic doors, because it would actually work out cheaper.
Very Easy to fit
Badger56 - 4 years ago
All very simple for very average talented DIY non enthusiast
Locally quoted £80- 100 per door to hang normal doors!!!
Only comment is that to fit the height of door frame the amount needed to cut off the bottom cuts the entire chunk of wood leaving bottom hollow.
If adjusted at top the hinges would be in the wrong position.
Lots of cosmetic adjustment required to fill the door frame.
Sounds like I am moaning. Not at all
They look pretty good
Not as "easy fit" as they claim
Mr JD - 4 years ago
Recently bought 7 but all had minor blemishes and/or marks, so a poor first impression. Fitting was less easy than suggested.
scampi - 4 years ago
I bought this door hoping it make life easy but ended up taking it back and buying standard doors. Nowhere on the packaging does it say how much you can trim it by I needed to phone B&Q who phoned manufacturer for the info. If you need the narrow 683mm door then avoid this product as the additional frames you need to fit make the doorway so narrow it looks silly.