See more Mitre Saws
B&Q 1500W 240V 210mm Sliding mitre saw BMS210M
This sliding mitre saw is ideal for cutting wood.
- No load speed - 4500 rpm
- Maximum cutting depth at 90° - 70mm/Maximum cutting depth at 45° mitre - 70mm
- Maximum cutting length at 90° of 220mm
- Maximum mitre left - 45°/Maximum mitre right - 45°
- Blade diameter - 210mm
Features and Benefits
- Carry handles for improved mobility
- Transparent safety guard
- Spindle lock for easy blade replacement
- Guarantee - 2 years
|No load speed||4500 rpm|
|Maximum cutting depth at 90°||70mm|
|Maximum cutting depth at 45° mitre||70mm|
|Maximum cutting depth at 45° bevel||70mm|
|Maximum cutting length at 90°||220mm|
|Maximum bevel left||45°|
|Maximum bevel right||45°|
|Maximum mitre right||45°|
|Blade type||TCT blade|
|Disc bore||30 mm|
|Blade guard||Blade guard|
|Locking device||Spindle lock|
|Blade brake||Electric brake|
|Switch type||Trigger switch|
|Cable length (m)||2m|
|Carry case||Carry case|
Great value saw that appears well designed
Engineer Ian - 1 year ago
This is a great product and rips through wood like butter. I checked out other mitre saws and chose this one after checking the amount of "play" in the pivots and sliders and found this one to be very good.
Warning!! Ironically I decided to change the blade so I could use it to cut metal but could not undo the bolt. I re-read the manual to check it wasn't a left hand thread and there is no mention of that. Furthermore the diagram clearly shows a normal thread that needs to be rotated anticlockwise to remove it (see attached picture). !
I returned the product thinking it most likely the bolt had been cross threaded and B & Q changed it without a problem (after they too tried to remove the bolt!!).
To cut a long story short I eventually found that it is a left hand thread!
I recommend this product as a good buy.
Very Good but a small design flaw.
Timko - 1 year ago
I previously had the static saw for many years, which was very good until I tried to buy a new blade, couldn't.
So invested in this one, blade a bit smaller, but ok, could benefit from a finer tooth pitch.
The flaw is that you cannot use the item clamp on the right hand side as it stops the sliding part as the motor unit crashes into the clamp upright.
OK for rough cutting, but be prepared for sand edges alot.
Good for the price.
The O G - 1 year ago
What a great mitre saw for the home user.
Accurate cuts, huge range of cuts in comparison to similar saws.
Worth every penny
kej - 1 year ago
For the money you cannot fault this, 48T blade as standard. Sepnt an hour setting it up, as the fence was in wrong position and not at 90 deg to blade and mitre stops were all over the shop out of the box, but after that, excellent cuts.
Customers who bought this also browsed
Bosch PSA 710W 240V Reciprocating saw PSA700E
This corded reciprocating saw is ideal for quick cuts in wood such as beams or branches and suitable for cutting plastic and metal. 0-2700 rpm no load speed Maximum cutting capacity of 150mm on wood and 10mm on metal Stroke length of 20mm Tool free blade change Comes with 1x ...
DeWalt 1100W 240V 216mm Compound Mitre Saw DWS773-GB
Comes with work piece clamp, removable carry handles, 30T TCT blade, hex key and blade key No load speed - 4500 rpm Maximum cutting depth at 90° - 70mm Maximum cutting length at 90° of 250mm Maximum mitre left - 48°/Maximum mitre right - 48° Blade diameter - 216mm
JCB 1100W 240V Reciprocating Saw PSR110J2
This corded reciprocating saw is ideal for cutting wood, metal and plastic. 2700 rpm no load speed Maximum cutting capacity of 300mm on wood and 10mm on metal Stroke length of 28mm Tool free blade change Comes with 1 x wood blade, 1 x metal blade, 1 x hex key ...
JCB 1500W 220-240V 190mm Circular Saw PSC190J2
This corded circular saw is ideal cutting laminate worktops, boards and sheet materials. 5000 rpm no load speed 66mm maximum cutting depth at 90° and maximum cut at 45° mitre 190mm diameter blade Depth adjustment facility Features: Trigger switch, soft grip handle and 3m cable