See more Pull Switches & Cords
B&Q 2A 1-Way White Replacement ceiling pull switch
This replacement ceiling pull switch is intended for use controlling circuits in bathrooms, and features a 250mm pull cord.
Features and Benefits
For your safety, electrical products must be installed in accordance with local building regulations. If in any doubt, or where required by the law, consult a competent person who is registered with an electrical self-certification scheme.
- Logic Plus wiring devices have been designed with an unobtrusive and sophisticated look, totally in keeping with today's design
- Technically they exceed British Standard requirements with patented features that make these products the most advanced and safest available
- Guarantee - 1 year
|Number of gangs||1|
|Number of ways||1|
|Number of poles||Single pole|
|Length of cord||250mm|
Direct replacement unit
NABITNOW - 1 year ago
I searched the internet for these switches when the one in my ceiling fan/light stopped working. Internet prices were more than this one from B&Q unless I wanted to wait for several weeks for some from China, which I didn't.
Unit was exactly the same as the one that was broken (after several years daily use) and easy to fit.
Good product, great price
So easy to change
Ted54 - 2 years ago
After looking around to replace a ceiling fan that was going to cost £200 like for like I spotted this item on diy.com and thought at this price got to be worth a try. 5 minutes after getting home with the switch fan back to full operation. A saving of £296 what more excuse do you need.
Excellent little handy swith for costly fan-light
cpatel - 3 years ago
My fan-light pull cord switch was damaged (2-3 years old). Not sure what went wrong, then I come across this switch and I replaced it. It saved my costly fan-light. Excellent quality product and easy to change.
Useful little on/off switch
Anonymous - 3 years ago
Just purchased these switches in order to select individual lights on a common supply. Look good for the purpose.... BUT B&Q description is wrong. The PULL CORD is shorter (at 120mm) = approximately half the claimed length - This is a nuisance as I will need to extend them in order to reach them. This will detract from the appearance!
Customers who bought this also browsed
B&Q 2A 1-Way Single White Plastic Press Switch
Raised screwless profile press switch with plastic plastic white finish. 1 gang internal switch, ideal for controlling 1 circuit. Location: Internal use Switch type: Push switch Suitable for: Suitable for operating electrical lights
Crabtree 10A 2-Way Quadruple White Gloss Light Switch
Raised screwed profile light switch with plastic gloss white finish. 4 gang internal switch, ideal for controlling 4 circuits. 2 way switches make it possible to control the same light from 2 locations. Location: Internal use Switch type: Rocker For use in 1 or 2 way circuits
Crabtree 10A 2-Way Single White Gloss Architrave Switch
Raised screwed profile architrave switch with plastic gloss white finish. 1 gang internal switch, ideal for controlling 1 circuit. 2 way switches make it possible to control the same light from 2 locations. Location: Internal use Switch type: Rocker For use in 1 or 2 way circuits
Crabtree 10A Single White Gloss Intermediate Switch
Raised screwed profile intermediate switch with plastic gloss white finish. 1 gang internal switch, ideal for controlling 1 circuit. Location: Internal use Switch type: Rocker Terminals will accept 4 x 1mm2