See more Lampholders

Home

Right chevron

Lighting

Right chevron

Lampholders

Right chevron
Click here to open image in fullscreen

B&Q Lampholder (L)10mm

£7.40
Loading
Checking availability...
Loading
Checking availability...

Product Details

Product Information

This lampholder has a simple design and a Bayonet Cap (B22) cap fitting. It's ideal for helping you control the lighting in your home.

  • Guarantee - 1 year

Features and Benefits

    Technical Specifications

    BrandB&Q
    FinishNickel effect
    MaterialBrass
    Cap fittingBayonet Cap (B22)
    Voltage rating240 V
    Length (mm)10 mm
    LocationInternal
    ModelNS10
    Product code03619605

    Reviews

    Full star
    Full star
    Full star
    Empty star
    Empty star
    3 / 5(4 reviews)

    Disappointing

    Full star
    Full star
    Empty star
    Empty star
    Empty star

    Lee21 - 1 year ago

    Bought this today. Although it is British made two of the 3 terminal screws were so loose in their chambers that they would not tighten onto the cable. I had to solder them in.

    Very poor design

    Full star
    Empty star
    Empty star
    Empty star
    Empty star

    Geronimo_2 - 1 year ago

    I originally purchased three of the lamp holders to replace American cable and socket on lamps bought in the U.S., two of the three sockets were returned to the store because the earth connection within the socket was unusable due to the small anchor screw turning on itself and not holding the earth in place. I have since purchased a further socket which is little better but by increasing the wire in the socket (doubling the wire on itself) have managed to secure the earth. I am not happy with the socket and continue to look for a replacement which is difficult because the connection of the socket is via a 10mm screw thread inner tube

    Good safety feature.

    Full star
    Full star
    Full star
    Full star
    Full star

    Anonymous - 1 year ago

    Strong metal structure with safety feature. Recommended.

    Good product - Just a little short on info

    Full star
    Full star
    Full star
    Full star
    Empty star

    VintageSparks - 2 years ago

    These things come in two sizes - 10mm or 12.7mm (½")and nothing on the packaging or DIY.com says that these measurements refer to the diameter at the base of the fitting. But once you have that sorted, it's pretty well plain sailing afterwards.
    As my lamp was metal, I would have preferred a facility for an earth the but this wasn't difficult to overcome.
    All-in-all, not the most robust piece of kit I've ever purchased but good value and seems to be doing the job so far.