See more Laminate Flooring
This laminate flooring has an attractive Painted wood effect finish, brushed & embossed surface finish and 4 sided bevelled edge. Each plank uses a simple click system, so installation is simple and it can be used with underfloor heating to keep your home warm.
- Fitting type: Drop lock click system
- Not water resistant
- Suitable for use with underfloor heating
- 20 years guarantee
Features and Benefits
- Easy to fit
- Embossed finish to create the look and feel of real wood
- Modern wood effect design
- Made with responsibly sourced Forest Friendly wood.
- Easy to fit
Health and Safety
Please note that this item has additional safety or regulatory datasheets available. The product may have possible health and safety hazards covered in these documents. Refer to the container for full information and always follow the instructions.
|Effect||Painted wood effect|
|Surface finish||Brushed & embossed|
|Material||High density fibreboard (HDF)|
|Base material||High density fibreboard (HDF)|
|Underlay type required||Foam, wood fibre or combi (DPM)|
joanne12345677 - 3 years ago
Boards are bendy doesnt lay well and chips to death laid a quarter of the floor now have to lift the lot and return it on examination of the boxes further noticed that most boards were chipped!! Being white its really visable, very very poor for the price
Looks like wood
Me52 - 3 years ago
I bought this on line the boards arrived &. Looked good,
bexie86 - 3 years ago
Just had this laid in my new flat looks beautiful against both a light yellow in my hallway and the vibrant cerise In living room, had the wide planks laid widthwise and it has made my space look huge!! Only downside is that the finishings such as scotia beading and matwell edges are slightly harder to find in a matching colour of good material at a good price
OKAY PRODUCT BUT!!!!
steve_southend_58 - 3 years ago
Bought this to do a downstairs games room.
Board quality okay. Only 1 damaged board from 7 packs.
PLEASE PLEASE PLEASE ignore the fitting instructions, I have fitted laminate flooring on several occasions but thought I'd best read the blurb that came with the floor.
The instructions tell you to start in the left hand corner of the room with the tongue against the wall. As soon as you've done this you will see that you can't fit the next board. You also have a finished edge facing you so the next row has to slide under the first row, this just digs up the underlay.
Try starting in the right hand corner and lay from right to left. Fit the first board with the finished edge against the wall. This means the unfinished "tongue" is facing you so when you do the next row you can sit the new board on the tongue then rotate it downward. A gentle tap with a white rubber mallet is also helpful.
Getting the first row right is very important. If you don't the next row wont clip in.
Edges are easily damaged but with care this should not be a problem.
Azkabanter - 3 years ago
Was fitted by our builders with no trouble, white & woodsy