See more Contemporary Fence Panels
Blooma Neva Fence slat (W)1.79 m (H)0.16m, Pack of 3
This Neva composite fence slat is part of the Neva modular fencing range and is designed to slot horizontally into the Neva fence posts (sold separately) allowing you to create your own custom run of fencing.
- UV treated
- Guarantee - 5 year
Features and Benefits
The Neva Modular Fencing system has an innovative choice of wood, composite and metal components to mix and match for total freedom of design. Simple to plan, this easy-to-use, stylish and flexible system offers no end of practical and decorative possibilities for your garden.
- Easy to assemble the slats slide horizontally into the slotted fence posts and fit together with the tongue and groove edges.
- Each pack of three slats will create a panel 450mm high. 4 packs will give you a full height panel. (1800mm)
- Use Blooma Neva dark grey finishing profile, available separately, at the top and bottom of the composite slats to give your fence the finishing touch.
- Made from quality reinforced composite material that is mould and scratch resistant.
- UV protected so the colour won't fade.
|Colour description||Dark grey|
Difficulty sourcing the grey Aluminium option.
Scooge - 7 months ago
B & Q website doesn't fully explain what you my need for your project.
I was unaware that a finishing profile caters for both the top and bottom of a 1.8m long section so I bought 2 x more than I required, [ duly returned]
This Neva fence system is most certainly not designed for/suitable for sloping ground .***
***The foundations for the posts, for each 1.8 m long section, must be the same level [ ie horizontal]
Thand - 11 months ago
Finally got enough to build my complete fence, but it's too cold now to set the posts, but 3 panels up and looks really good. It's really easy to install.
Good product just not enough in store
Thand - 1 year ago
Looks great, but only found enough for one panel, built this using the 8 foot aluminium posts which are light weight and fairly easy to install. If you are doing a full fence recommend you make up a jig to ensure correct spacing between posts. Also the instructions are not too detailed so suggest you screw the infill to the post to maintain the right height for the bottom of the fence. Just hope they get enough in store so I can build the rest of my fence
Fab looking, receives compliments, mind the sizes!
crossway62 - 1 year ago
We bought this to replace three wooden fence panels and to create a new fence between house and pavement. The panels look really smart at the front with the matching posts and as we had the remains of a brick wall in the ground already there was a suitable base to drill in to for the posts - so that was handy for a non-DIYer! NB you have to buy the bolts for the posts separate and are not part of the range. The problem for us was the fitting to the existing concrete posts as these boards are short of 6ft which we had overlooked, so trying to get them to fit proved a challenge (possibly less so for a skilled DIYer) - ultimately we had to use wood and some gravel board brackets to hold these in place - in hindsight you could I guess use the Finishing Profile bars and attach them in a suitable way for the sides. NB If you are putting new posts in from scratch then you would just size them accordingly and you would have no issue with these boards. Still pleased with the result of the fence. Hopefully maintenance free and worth the cost of the outlay.