See more Fence post support
Blooma Steel Post support (L)70mm (W)70mm
Use this post anchor support to replace, repair or create your own run of fencing. It's solid galvanised steel construction has been specifically designed to last longer, and withstand the harsher, weather conditions.
- To be dug in to the ground
- Comes with Comes with galvanised posts and screws
- Compatible with Compatible with timber post green 70 mm sq
Rubbish & Weak!!
TerryTibbs - 2 months ago
Don’t waste your time or money with these!! As soon as the wind picks up they have no chance. There isn’t enough weld on the top but attached to the spike and they snap off!! Purchased 11 - within 3 months 6 have snapped.
Good product and effective
jonkla - 3 months ago
Cheap and effective - have not had any problems with metal bending or cracking but make sure you buy a post driver (2 pounds in b&q) as it will make the whole difference knocking the supports into the soil!
Good spikes, curious fixings...
Rory V - 3 months ago
The spikes themselves are good, but the fixings provided are not ideal. It is four torx screws, not the nuts and bolts pictured. So if you were to use them all, they would collide in the middle of the post, as the holes in the collar are directly opposite each other. Also you would need a largish torx bit, which is not very convenient. They are a good length, but it would probably be better to just use nuts and bolts.
philb61 - 4 months ago
The spike comes with different fixings. The photo shows 2 long bolts for bolting through the spike. You actually get 4 'torx' head screws which you need a special screwdriver to fit them with.
Nightwish - 9 months ago
Too small to fit a standard 75mm section fence post.
What is it supposed to fit.
Welds also broke when hammering into hard ground.