Bonda Seal - Clear 1ltr

• Guarantee - Statutory
• Will store for many years if suitably stored unopened in original container. NOTE; this is a moisture-hardened product so storage life of opened tins is limited.
• Apply by brush or roller. Should be applied onto a bare, clean and dry substrate. Existing coatings, paint or other treatments should be removed. For most sealing purposes 3 coats are recommended. Each coat can be reapplied when the surface is finger tacky. Do not allow 4 hours to elapse between coats. Clean equipment with Rustins Cellulose Thinners. Turpentine or White Spirit are unsuitable.
• Keep out of reach of children. Avoid ignition sources. Do not spray. Do not inhale vapour.

Features and benefits

A moisture cured single part polyurethane varnish.

The coating is tough yet flexible and has excellent adhesion to many materials.

Bonda seal is resistant to oils, fuels and a range of aggressive chemicals.

Prevents the oxidising and tarnishing of metal.

• Clear, Non-Yellowing, U.V light stable, non-porous-seal.
• Use on wood, masonry, concrete, cement and stone floors
• Retain the appearance of finished surfaces, preventing oxidisation and tarnishing of metal
• Resistant to oils, fuels and a range of aggressive chemical
• Suitable for application at high & low temperatures