See more Flush hinges
Brass-plated Metal Flush Door hinge (L)50mm, Pack of 8
Product details
Product information
These brass effect metal flush hinges are suitable for use on small cupboard/louvre doors. Fixings supplied for quick and simple installation.
- Only fixings included
- Suitable for Cupboard & louvre
Specifications
| Product type | Door hinge |
|---|---|
| Pack quantity | 8 |
| Hinge type | Flush |
| Location | Internal |
| Plating | Brass-plated |
| Product length | 50mm |
| Product width | 50mm |
| Material | Metal |
| Product code | 03207574 |
Reviews
You get what you pay for.
Mike 173372 - 8 months ago
The screw round out with the slightest Bit of pressure. The hinge pins are bent so when in the closed position the door doesn’t align. None of the hole are in line so when you reverse mark the holes they are out when you “attempt” to use the cheeseium screws.
They do the job but need some modifying.
Upset in Catford - 4 years ago
As the previous reviewer said the screws are made of cheap soft metal so mostly useless!
The biggest problem is the hinges not closing flush due the the countersinking in the hinge bodies causing the screw heads to stand proud and prevent flush closing.
I used a 6mm HSS drill to deepen the countersinks to allow the screw heads to sit flush with the hinge surface to enable the doors to close flush..
Good Hinges but get Replacement Screws
diybob64 - 4 years ago
I bought these to fit to some custom MDF doors that I made. The hinges did the trick perfectly, but I had to buy a set of replacement screws (3x20mm). The ones supplied had malformed posidriv (PZ1) sockets, were soft and either broke off or became unusable after being done up once.