See more USB Sockets

Home

Right chevron

USB Sockets

Right chevron

British General Nickel effect Double USB socket, 4 x 4.2A USB

£20
Loading
Checking availability...
Loading
Checking availability...

Our stores do not stock this product

Product Details

Product Information

Raised screwed profile socket with polished pearl nickel finish and white insert.

  • Suitable for Internal use
  • Only fixings included

Features and Benefits

For your safety, electrical products must be installed in accordance with local building regulations. If in any doubt, or where required by the law, consult a competent person who is registered with an electrical self-certification scheme.

  • Free up your sockets. Power and charge your mobile devices leaving sockets free for other appliances
  • 4.2A USB output shared across both pairs of ports (2.1A Each pair)
  • Charge time is dependent on the attached device(s) power requirements, and charge time may slow if both ports are used
  • Smart USB - detects the charging pattern for your device, and protects against overloads
  • Ideal for retrofit, sockets fit a 25mm box. Easy to install, sockets include colour coded, inline terminals to aid installation

Specifications

BrandBritish General
Model name/numberNPR24U44W/UB-BQ
Pack quantity1
EffectNickel effect
ProfileRaised
Screwed/screwlessScrewed
Power voltage supply240V
Insert colourWhite
USB maximum current4.2A
Number of USB outlets4
Product code5050765137232

Reviews

Full star
Full star
Full star
Full star
Full star
5 / 5(1 reviews)

Two minor quibbles but excellent product

Full star
Full star
Full star
Full star
Full star

JSG - 2 years ago

This gives you four USB ports. Each pair will deliver up to 2.1 amps. That's enough to charge two devices at a decent rate or four at roughly half speed.

Quibble 1: You don't get "Rapid fast charge" but that is not advertised. A pair of Samsung Galaxy S6s recharge at a decent rate so I'm not going to mark down for that. I haven't timed it but about an hour or so.

Quibble 2: The main sockets are unswitched. I suspect that is so that the thing can be kept slim enough to fit into a 25mm backbox. I'd prefer switched but I've checked and it seems that "local isolation" (which the standards require) is achieved by removing the plug.

The unit looks good and feels well built. It is a doddle to fit with generously large holes for the wires and a decently long thread on the grub screws and a mechanism that stops you removing them by accident. There are two, joined, earth points. They even colour code the live/neutral/earths as well as text, so it would be pretty hard to get it wrong. The wiring block is at the top, roughly between the USB ports.