A heavy weight router table with a solid one piece cast iron top. The rigid steel floor stand provides a comfortable working height for handling large panels. The table top is hinged to the floor stand and can be raised up, making the router more accessible when adjustments are needed. The table aperture is 100mm diameter with insert rings provided to reduce this size when using smaller diameter cutters. The fence allows work pieces to be securely held during the cut with the aid of 2 fence mounted feather boards, to hold the work down against the table, and the front feather board to hold the work up against the fence. Using this method edge mouldings can safely be cut onto small pieces such as beading or picture frames. There is also a scale, marked in both metric and imperial, mounted into the table to act as a guide when setting the fence. Our unique centralising jig allows you to set your router accurately and quickly into the table. It then holds the router in place whilst you lock the clamps underneath the table. For the odd job where the whole face of the timber is being removed, a set of shims are supplied that can be added to the outfeed fence to step it out and provide support to the work piece. The cast metal mitre fence runs in a T-slot and is particularly accurate on this model. The mitre guide swings from 90 to 30 degrees each way with locater for accurate end grain work. The clamping system, used to attach the router to the table, is universal allowing any sized router from any manufacturer to be used. Available as an optional item: Our W026 NVR switch is recommended as a safety device to prevent the operator from having to reach underneath the table to start and stop the router.

** Charnwood W020 Specification: Table size 680mm x 510mm, Table height 860mm, Cutter aperture 30mm / 60mm / 100mm, Mitre Guide T-Slot (WxD) 19mm / 26mm x 9.5mm, Dimensions (WxDxH) 860mm x 660mm x 1120mm, Weight 58kg, Warranty 1 Year.