A floorstanding woodworking bandsaw with some great features. This is traditionally the most popular sized woodworking bandsaw for the Extractors or woodturners workshop. With features such as an all steel construction, a cast iron tilting table with a 90 degree return stop and powder coat paint finish, all ensuring this freestanding 300mm woodworking bandsaw is tough enough for any workshop. The pressed steel frame ensures the rigidity required for high blade tension and accurate ripping. The bandsaw blade is kept true by 2 large roller guides mounted to the blade guard and two steel guide blocks mounted below the table. The rise & fall of the blade guard can be adjusted and locked in position with one hand. A simple adjustment of the drive belt lowers the blade speed for anyone wishing to cut metals, plastics and very hard woods. Supplied with steel floorstand, quick lock rip fence, a cast metal sliding mitre guide with fence adjustable 45 degrees each way, 1/2″ high quality British made woodcutting bandsaw blade, NVR starter switch, 100mm diameter extraction outlet, 1.7m power cable and UK 3 pin plug. This Bandsaw is fitted with a High Quality, British manufactured blade with precision ground teeth for incredible cutting results. The primary use of this bandsaw is for woodworking and the blade supplied is suitable for cutting both hard and soft woods. It is possible to use this bandsaw for cutting metal but only with the correct blade fitted. (Not supplied).