See more Switches with Indicators
Colours 20A Brushed stainless steel effect Switch
Our stores do not stock this product
This Colours flat screwless screwless brushed steel switch with led has a neon indicator is rated to 20A and, for internal use.
- Only fixings included
Features and benefits
- No visible fixing screws
|Effect||Stainless steel effect|
|Number of gangs||1|
Not of great quality
GW0 VSO - 8 months ago
Refurbishing our kitchen, changing switches etc.,two of these were used for washer and fridge, besides the switch connections being upside down, normally live at the top, load at the bottom, they are reversed, making connections difficult.
The switch failed to operate after two weeks, opened it up to examine, the plastic moulding housing the switch components had broken, could not return it as receipt had been thrown out.
Would not purchase this make again.
Nikinoo70 - 3 years ago
I bought these to isolate the sockets under the appliances. They look nice but the supply side is at the bottom and the load side is at the top. As with most kitchens the supply comes from above and the appliance is below. Not a lot of room in the back for it to be part of a ring main.They are the right way around for storage heaters but that is about all. It wouldn't matter for them as there are only 2 cables going in not 3. Would be interested to know if the switched fused spurs are the same way around. They are made by British General. It has their name under the front plate. They are not very good quality. A bit flimsy. The earth terminal bent away from the plate while I was preparing the terminal for the cable. I have sockets and light switches aswell. I will probably have to replace them in a few years as the front plate doesn't seem all that secure.