See more Thresholds, T-bars & Reducers

Home

Right chevron

Flooring & Tiling

Right chevron

Flooring Supplies

Right chevron

Colours Aluminium effect Floor threshold 180 cm

£19.87
Loading
Checking availability...
Loading
Checking availability...

Product Details

Product Information

  • Suitable for joining two floors of the same level from 5-18 mm in height, or where the difference in height between floorcoverings is up to 14mm. the height of the flooring is up to 24mm
  • Includes self adhesive base, small medium & large fitting clips
  • Suitable for use with underfloor heating

Features and Benefits

  • No drilling required
  • Easy to fit
  • Maximum height of the higher floor covering is 24mm
  • Self adhesive, no drilling required for installation

Technical Specifications

FinishAluminium effect
Surface finishPolished
Length (cm)180cm
Width (cm)3.8cm
Thickness (mm)14mm
For use onSolid, laminate, engineered & multi layer flooring
Pack quantity1
Product code5397007156515

Reviews

Full star
Full star
Half star
Empty star
Empty star
2.5 / 5(2 reviews)

Good with slight mod

Full star
Full star
Full star
Full star
Empty star

jdt - 2 years ago

Having laid a carpet and coir mat, we needed something with good height. Having tried several conventional thresholds, all of which incidently proved useless, I chose this product. Sold with 3 sets of riser blocks you simply cut the threshold to length, then fit the required risers. They are a tight fit, but that is neccessary due to the design, I found the best way to slide them in the channel was light tap with a small toffee hammer (little hammer).
Commonsense would dictate that double sided tape is probably not a good idea. I chose to modify the unit.
1) Drill 4mm diameter holes through the channel in which the risers fit at regular intervals.
2) Position the threshold and mark the floor through the 4mm dia holes. Remove threshold.
3) If the substrate is concrete drill the floor with 5mm dia masonry drill and fit rawplugs.
4) Reposition the threshold and secure in position with 3.5 x 25mm pan head selftapping screws.
The cover plate can now be fitted safe in the knowledge that it wont move.

Terrible Product

Full star
Empty star
Empty star
Empty star
Empty star

RJR - 3 years ago

1. Who thought double sided tape is an appropriate means to attach this to the sub floor? It isn't.
2. The plastic clips that hold it in place are very difficult to attach and locate onto the bit that is sticky taped to the sub floor it you are installing this in a doorframe. Owing to its length I'm guessing this is where most people will be placing it?
3. B&Q seem to only stock one threshold that can be screwed in place rather than stuck down with sticky tape. Madness.

Don't buy this. It is a disaster.