See more Wood Furniture Paint & Treatments
Colours Grey slate Satin Metal & wood paint, 0.75L
Our stores do not stock this product
This Grey slate satin wood & metal paint has been specially designed to give a durable and long-lasting finish on a range of surfaces. Simply apply 2 coats with a brush or roller and leave for 12 hours to dry - a great way to give the surfaces additional protection. Covers up to 10 m² per litre on average.
- Suitable for Metal & wood
- Treat bare wood & metal with an appropriate undercoat & primer. Treat knots with a knotting solution. Metal surfaces must be free from rust & corrosion.
Features and benefits
At B&Q we want you to be satisfied with your colour selection. Not all monitors will display colours the same and paint tins may not show the same colour as your walls do in natural light. We therefore recommend you order a tester pot online or pop in store to pick one up so you are sure that this is the right colour for you.
- Control air pollutants by choosing products with lower solvent levels
Health and safety
Please note that this item has additional safety or regulatory datasheets available. The product may have possible health and safety hazards covered in these documents. Refer to the container for full information and always follow the instructions.
|Application method||Brush or roller|
|Drying time||12 hours|
|Recoat time||4 hours|
|Minimum touch dry time||4h|
Loved the paint.
DIY simon - 2 months ago
Loved the paint. Use correct undercoat. Good satin sheen and no problem with the colour in my experience. Quick drying so dont hang around and get on with it.
Emma68 - 7 months ago
I bought this for all my interior woodwork. It was impossible to mix fully so each new 'pour' was a different shade of grey. You couldn't tell either until it was dry.
Don't waste your money
Bluenose56 - 7 months ago
Wish we had read the reviews As previously stated it is a waste of money .Painted 5 doors all are different shades due to having to keep stirring the tin.
Applies poorly and feels rough to touch ,even after 2 coats .Once dry even a gentle rub to remove a mark also removed the paint .Very poor quality .
Wrong colour very light
Lesley67 - 10 months ago
not happy as the paint was a lot lighter than on the tin no way is it grey slate was very light grey. I had to buy another tin different brand to try and get the shade needed.
Nessa70 - 1 year ago
Totally different colour , a lot lighter than the can says