See more Thresholds, T-bars & Reducers

Home

Right chevron

Flooring & Tiling

Right chevron

Flooring Supplies

Right chevron

Colours Warm oak effect Floor threshold 90 cm of 1

£11.97
£13.30 per M2
Loading
Checking availability...
Loading
Checking availability...

Product Details

Product Information

  • 1 year Guarantee

Features and Benefits

  • Self adhesive, no drilling required for installation

Technical Specifications

FinishWarm oak effect
MaterialPVC
Length (cm)90cm
Width (cm)3.8cm
Thickness (mm)14mm
For use onAll floor types - wood laminate, carpet, carpet tiles, & ceramic tiles
Pack quantity1
Product code5397007164220

Reviews

Full star
Half star
Empty star
Empty star
Empty star
1.63 / 5(19 reviews)

Not fit for purpose

Full star
Empty star
Empty star
Empty star
Empty star

Daveuk86 - 10 months ago

Sticky back? Seriously? Also 'tap the clips into place'.... yeah sure easy as that! The clips don't fit, I only managed to get them in using a block and a hammer whilst tediously balancing them, completely ridiculous system. I would LOVE to watch the person that designed these use them

What can I say....

Full star
Empty star
Empty star
Empty star
Empty star

Dizzy 1 - 1 year ago

I can see this would be a good idea on the drawing board, but doesn't work in the real world. The adhesive backing would have a limited life on a concrete floor. I used screws and wall plugs to attach. The clips are difficult to insert but a flat repair plate inserted into the clip and a sharp tap with a hammer makes installing the clips easy. The idea as I see it is that as the threshold is inserted into the clips, one edge contacts the higher of the two floors. As the threshold is pushed further into the clips, this bends the central tongue until the threshold contacts the lower level flooring. In my situation I had laminate to vinyl with a height difference of only a few millimetres. The threshold bottomed out before any significant tilting of the threshold occurred. I will be buying an offset threshold to replace this one. There is clearly, in my opinion a minimum height for the higher level flooring and this should be clearly marked on the packaging.

waste of money

Full star
Empty star
Empty star
Empty star
Empty star

jbz4941 - 1 year ago

Will not stick to wooden floor, clips have to be hammered into back strip and if you fit to try height and find you need to fit a different clip they're hard to get out. Used once in the past ended up having to glue down. Its all they sell so ended up buying two for upstairs floors. Compete waste of time

Appalling don't bother

Full star
Empty star
Empty star
Empty star
Empty star

Wallybobs - 1 year ago

1 - Comes with sticky back! This will not stick to any natural flooring e.g. Wood stone etc so you have to drill holes in it and screw it down.
2 - the inserts that are supposed to just click into place ... Don't! Had to use a screw driver and bash them home!
3 - Finally, when you've eventually found the inserts that are the right height and clip the strip in place, it moves up and down, doesn't sit tight and squeeks every time you stand on it!

Recommend... buy a screw down one instead!

Does exactly what it say

Full star
Full star
Full star
Full star
Full star

DazB1 - 1 year ago

I found this to be very easy to install and gives a neat finish. After selecting the correct size clips (three sizes included) insert a flat head screw driver into the slot of clip and push them into the holder once they click there in easy. Line up the threshold and push it into place job done.

  1. Show all customer reviewsRight chevron