Colron Refined Antique pine Matt Furniture Wood dye, 250ml

• Deeply penetrative wood dye with light fast pigments
• Suitable for All types of wood
• Surface Preparation - Colron Refined Wood Dye is only absorbed by clean, dry, untreated timber which is free from dirt, oil and grease. Any previously applied finish such as paint, varnish, seal polish or wax must be completely removed. Prepare the surface well. Colron Refined Wood Dye and compatible varnishes provide a transparent finish any marks, blemishes or stains in the substrate will show through. Any discoloured wood should be sanded until an original surface is visible. Sand lightly in the direction of the grain taking care not to oversand or “polish” the surface. Oily hardwoods such as teak, resinous areas and knots should be thoroughly washed with white spirit. Remove any dust using a brush or vacuum cleaner and wipe the surface using a cloth soaked with white spirit. Allow to dry thoroughly.
• Instructions for Use - Colron Refined Wood Dye can be applied with a soft cloth or sponge. When treating large areas such as doors or floors apply the dye one length of floorboard or a section of door at a time to avoid overlaps, work quickly to maintain a wet edge. Application by cloth or sponge will result in a lighter shade. A one coat application is normally sufficient, but colour may be intensified and a more even finish achieved by the application of further coats of Colron Refined Wood Dye. Allow 1 hour between coats. Do not apply more than three coats. Seal the dye using Colron Refined Interior Lacquer. When treating floors use Ronseal Diamond Hard Clear Floor Varnish. Allow the dye to dry for 1 hour prior to application of varnish.
• Guarantee - Statutory

Features and benefits

• A water-based acrylic wood dye for unfinished or bare interior wood
• Penetrates deeply into the wood to produce a deep, rich colour
• Contains fade resistant, non-yellowing pigments for lasting colour
• Quick drying
• Low VOC
• Apply by cloth