Concrete Sealer Pro ULTRA - High Resin Content - Block Paving & Concrete. Concrete Surfaces. Solvent Based 25L (5x5L Tubs)
Product Features
- Gloss/ Satin - A smooth, mid-sheen look that gently enhances the colour and texture.
- Seals and protects block paving and pattern imprinted concrete
- Enhances colour and prevents fading
Product details
Product information
PureSeal ConcreteSealer Pro ULTRA is a the highest solids acrylic sealer available on the market and is designed for sealing block paving, slabs or imprinted concrete. This concrete sealer offers greater coverage rates and a tougher, more durable finish due to its higher resin content. It is easy to apply by brush, roller or sprayer, and because it is solvent-based, it dries quickly to a super strong finish, which is perfect for commercial environments. The sealer’s finish will range from enhanced to gloss, depending on the number of coats applied. Application: Depending on the surface you are working with, you can apply Concrete Sealer Pro Ultra with a brush, roller or sprayer. Always complete a test patch to determine coverage, as porosity of concrete can vary. A heavy first coat is beneficial on block paving, whereas lighter coats will be required on pattern-imprinted concrete to prevent bubbling. Allow 40 minutes between coats. Apply your second coat 90 degree to the first. Clean tools and equipment with xylene after use. Do not use a roller on block paving to prevent spreading sand across the surface. Do not apply this sealer if the ground temperature is over 22 degrees as this will cause the sealer to flash dry and fail. Top Tips: Remove any excess sand from block paving with a leaf blower before application. Mask and protect delicate surfaces to prevent damage. PPE Required: Chemical resistant gloves, Eye protection Respirator with ABEK P3 filters, Overalls Coverage: Up to 10m² per litre, per coat, depending on the porosity of the surface
- Guarantee - 1 month
- Suitable for use on Concrete surfaces
- Surface Preparation - Ensure the surface is completely clean, dry, and free from algae, moss, dirt, and grease. Use a leaf blower to remove loose sand from block paving joints. Mask off any surrounding areas to avoid overspray or splashing.
- Instructions for Use - Apply using a brush, sprayer, or roller (note: do not use a roller on block paving to avoid dragging sand across the surface). Apply the first coat generously, especially on block paving to penetrate and bind the joints. Allow 40 minutes drying time before applying a second coat at 90° to the first for even coverage. Apply in temperatures between 10–22°C. Do not apply in hot or direct sunlight.
Features & benefits
Seals and protects block paving and pattern imprinted concrete Enhances colour and prevents fading Water, oil, and stain resistant Helps prevent weed growth and binds jointing sand Suitable for patios, driveways, paths, and courtyards Quick-drying, easy to apply, and long-lasting Up to 10m² per litre, per coat – varies depending on porosity and surface texture.
- Gloss/ Satin - A smooth, mid-sheen look that gently enhances the colour and texture.
- Seals and protects block paving and pattern imprinted concrete
- Enhances colour and prevents fading
- Water, oil, and stain resistant
- Helps prevent weed growth and binds jointing sand
- Suitable for patios, driveways, paths, and courtyards
- Quick-drying, easy to apply, and long-lasting
- Up to 10m² per litre, depending on the porosity and texture of the surface
- Before full application, carry out a test patch in an inconspicuous area to confirm compatibility and finish.
Specifications
| Brand | Unknown |
|---|---|
| Application method | Brush, roller or spray |
| Base | Solvent-based |
| Colour | Clear |
| Container type | Tub |
| Finish | Gloss |
| Location | Interior & exterior |
| Room use | Any room |
| VOC level | No VOC level recorded |
| Product code | 5060826931136 |
Safety Information
Before full application, carry out a test patch in an inconspicuous area to confirm compatibility and finish.
Manufacturer / EU responsible person
Manufacturer
PureSeal Services UK Ltd