See more Worktops

Home

Right chevron

Bathroom

Right chevron

Bathroom Worktops

Right chevron

Worktops

Right chevron

Cooke & Lewis Hartland Bathroom worktop, (W)155mm

£50

Width (mm)

Previous arrow
Warning

This item is only available for purchase in store or by calling 0300 303 4481.

Product Details

Product Information

Cooke & Lewis Hartland natural Oak bathroom worktop. The surface is easy to install.

  • Assembly required
  • Made in - Poland
  • 2 years Guarantee

Features and Benefits

This solid oak worktop is ideal for topping our Imandra bathroom furniture range with, for additional surfaces on top of your cabinets to store your possessions. Supplied in 1.8m lengths it can be cut to size easily to fit your space.

  • Supplied in 1.8m lengths it can be cut to size easily to fit your space
  • Pre-oiled for moisture resistance
  • Must be re-oiled every 12 months
  • Compatible with the Imandra bathroom furniture range
  • This solid oak worktop is ideal for topping the standard depth wall cabinets within our Imandra bathroom furniture range, or for creating additional shelving to maximise storage

Health and Safety

Please note that this item has additional safety or regulatory datasheets available. The product may have possible health and safety hazards covered in these documents. Refer to the container for full information and always follow the instructions.

Technical Specifications

Width (mm)155 mm
Depth (mm)155 mm
MaterialSolid oak
Weight (kg)5.59kg
Made inPoland
Timber certificateTT-COC-003110
Timber approvalFSC® approved
Product code3663602933748

Reviews

Full star
Full star
Full star
Empty star
Empty star
3 / 5(1 reviews)

Some issues but workable.

Full star
Full star
Full star
Empty star
Empty star

Russkinpusskin - 7 months ago

Bought for a bathroom project.
Things to be aware of:
1 It’s a natural product, and despite being made of glued segments (which don’t normally suffer this problem) I discovered my purchase was warped in two directions (not badly, but I had to do a lot of extra work to get it true).
2 expect colour variation, knots and some zigzag joins.
3 It contains recycled wood (see photo), if unlucky (like me) you might find also nails already in it as well..(see photo)... As I discovered, a standard Bosch jigsaw will give you a heck of a kick back when it encounters a buried nail - so proceed with caution (it’s no fun having power saws jumping around)... I discovered the nails (all in one location) after the first kickback.. fortunately the collateral damage from the tool was right next to the nails and I was coincidentally removing that section of wood anyway, but if you do find some - note - they won’t sand out, they will rust, and they are only 1mm in diameter (so quite hard to spot) - my advice - check panel carefully and reject.
4 get some oil on it.. it’s classed as ‘oiled’, but I would say ‘barely’.
5 the wood cuts straight (except where it’s nails not wood), so clean edges are doable with a jigsaw (plus sanding) - I think the edging strips mentioned in the ad are not required.

Overall, “ok” but the warping and nails would suggest this could/should be cheaper..and come with a health warning.
I would have given 4 stars (better than working with chipboard laminate) but it required a bit too much effort (for £100 it should have been “true”) and the nails were an unwelcome surprise #stillgotmyfingers