See more Decking Paint & Treatments
Cuprinol UV guard Natural cedar Matt Decking oil & protector 2.5L
Revitalise and nourish your decking with this decking oil from Cuprinol Simply apply using a brush and leave for 6 hours to dry. Covers up to 8 m² per litre on average.
- Penetrates into decks to nourish, enhance & protect against the weather
- Protects decking against drying, splitting & greying
Features and Benefits
This decking oil & protector can be brushed or spray applied to penetrate deep into the wood, replacing the natural oils and resins that are lost during weathering. Its tinted formula enhances and revitalises the natural look of your decking.
- Lightly tinted finsh enhances the natural appearance of your decking
- Control air pollutants by choosing products with lower solvent levels.
- Cuprinol UV Guard Decking Oil can be used to penetrate into wood to replace natural oils and resins lost through weathering. Its tinted formula revitalises the colour of weathered wood
Health and Safety
Please note that this item has additional safety or regulatory datasheets available. The product may have possible health and safety hazards covered in these documents. Refer to the container for full information and always follow the instructions.
|Colour description||Natural cedar|
|Coverage||Up to 8 m² per litre|
|Drying time||6 hours|
|Paint/Stain/Varnish base||Oil based|
3 Years on and still like new
Newworldorder - 1 year ago
I can't recommend this product enough after applying 3 coast to almost all my wood in the garden the rain still runs off it 3 year later and the cheap garden treated pine still looks like expensive cedar.
The best product you will ever find.
tamzy - 2 years ago
Had this stuff on nearly everything in the garden and have been asked if my cheap preasure treated pine is expensive cedar! The water beads on the surface and its looking fresh afer a year of being knocked about tools drills coffee cups. I even rang the company to ask them never to change it!
Second coat made a big difference
Tryben - 3 years ago
It does say on the tin that two coats are necessary. The second coat made a big difference. Nice finish but it was expensive to have to buy a second tin for the second coat. If ordered on line don't expect it to arrive on the same day as any other products such as decking.
mrsde - 7 years ago
wasnt sure when first went on but when dried came out really well gave a whole new lease of life to our decking.
Not quite what we expected
Dottty - 7 years ago
New decking 10m x 5m. It took 10 tins to provide a
decent coating. We expected two coats would be required. Very patchy and runs alot. But the second coat gives a better effect but not perfect.
Customers who bought this also browsed
Cuprinol Natural oak Matt Anti Slip Decking stain
You can apply this anti slip decking stain from Cuprinol to , using a brush or roller, to colour and provide protection. It takes 2-6 hours to dry and will cover up to 8 m² per litre on average. Colours & protects against weathering Protects the film surface from green ...
Diall Clear Decking oil 5L
Revitalise and nourish your decking with this decking oil from Diall Simply apply using a brush and leave for 8 hours to dry. Covers up to 9 m² per litre on average. Replaces the natural oils lost through weathering Protects , nourishes, waterproofs & enhances the natural colour of wooden ...
Ronseal Clear Decking end grain protector 0.75L
You can apply this decking end grain protector from Ronseal to , using a brush, to provide protection. It takes 24 hours to dry and will cover up to 8 m² per litre on average. Keeps decks strong & protected from water damage
Ronseal Country oak Matt Decking stain 5L
You can apply this decking stain from Ronseal to , using a brush, to colour and provide protection. It takes 90 minutes to dry and will cover up to 6.4 m² per litre on average. Protects against weathering & wear & tear Prevents wood from greying, & colour from fading ...