A thicker wallpaper with a 3D effect that can be applied over flat tiles in a kitchen or bathroom, a quicker and easier option than retiling. This paper is very durable and completely waterproof when sealed with a varnished surface, it can even be used in a shower cubicle.

Make sure the surface is smooth, solid, dry and thoroughly clean before applying. If the surface is absorbent (eg. plastered walls) apply normal wallpaper paste to the reverse of the paper and leave to soak for 10 minutes. If the surface is non-absorbent (eg. ceramic tiles) use our glue and coat the wall, then apply the paper. Ensure strips are butt joined if applying several strips. The paper can be cut around sockets very easily with scissors. Seal any edges and joins using clear silicone sealant. Leave to dry for 24 hours before cleaning at room temperature.

Apply to smooth flat ceramic tiles, painted walls, hardboard, plywood or shower walls. Avoid uneven surfaces eg. raised tiles, wood panelling and damp walls that are untreated.

Unlike normal wallpaper, this is designed to hang horizontally on the wall, this gives you a join free finish on a kitchen splashback for example. The 3D effect makes it look and feel like actual tiles, many realistic tile and stone prints available.

To remove the paper, pull the PVC surface from the support paper at the corner. The paper layer which remains can be an ideal under-surface for another wallpaper, or remove it completely.