See more Ball, Fill & Float Valves
Diall Bottom Entry Adjustable Fill Valve
This plastic bottom entry adjustable fill valve is suitable for 1 and 2 piece universal fit toilets.
- Guarantee - 2 years
- Adjustment type - Adjustable height
- Bottom inlet cistern
Features and Benefits
- Brass shank
- Water saving function
- Adjustable water level
- High water pressure
- Good reliability
|BSP thread size||G1/2 "|
|Ease of application||Easy to assemble|
|WRAS approved||WRAS approved|
Replaced leaking Armitage Shanks Univalve
veryniceman - 5 months ago
Perfect fit. Only one adjustment needed. To do this lower the grey plastic pin until it comes loose then twist/rotate body clockwise (it will click immediately it moves - just a little). This allows adjustment of the assembly length to increase water level. When at desired setting reverse previous twist/rotation and reinsert grey plastic pin (in locking position) by pushing it upwards. It's worth setting the height as a trial-run before fitting because that makes it easier to adjust (if needed) when fitted.
Low cost and very quiet in operation.
Seems very good for the money
Baliene - 7 months ago
The instructions could be clearer but didnt take a lot of working out. It fitted well and seems to be working fine.
DBU - 8 months ago
purchased 2/5/18 fitted in 5 minutes, easy to adjust, very compact.
Longmanjon - 8 months ago
This is so easy to fit, yes the instructions are pictures but that is all that’s needed takes 5 mins. No more leaks
Son of mather - 9 months ago
Just fitted this, far quicker filling than my old inlet valve. Instructions could be clearer so take your time studying them. Very pleased though!!